Guide

THE TOOLBOX / WOODWORKING & SHOP MATH

Board Feet Calculator —
Hardwood Cost & 4×8 Plywood Cut-List.

Calculate exact board feet and lumber yard cost for 4/4 to 12/4 hardwoods with waste allowance, or optimize cabinet panels across 4×8 and 5×5 plywood sheets.

Order Board Feet
63.0 BF
52.5 net + 20% waste
Estimated Cost
$733
Net material: $611
Total Linear Feet
76.0 ft
3 lumber groups
15–25% typical for rough-sawn
Set All Species Price:
Part / SpeciesThick (in)Width (in)Length (ft)Qty$/BFBoard FeetCost
37.50 BF$431.25
7.00 BF$87.50
8.00 BF$92.00

HARDWOOD & SHEET GOODS GUIDE

Quarter-inch lumber sizing and board-foot pricing explained.

1. Board Foot vs. Linear Foot

A linear foot measures length only, regardless of width or thickness. A board foot measures volume (144 in³), so a 1" × 12" × 1 ft board and a 2" × 6" × 1 ft board are both exactly 1.0 board foot.

2. Rough-Sawn vs. S4S Thickness

Lumber yards charge based on rough-sawn nominal thickness (e.g., 4/4 = 1") even after the mill planes the board to 3/4" or 13/16". Always enter the nominal quarter-inch thickness when pricing hardwood.

3. Visual Plywood Nesting

Switch to the Plywood Cut-List Optimizer tab to nest cabinet sides, shelves, and drawer bottoms onto 4×8 or 5×5 Baltic Birch sheets with blade kerf spacing and yield percentages.

Frequently Asked Questions

What is the formula for calculating board feet?

Board Feet (BF) = (Thickness in inches × Width in inches × Length in feet) ÷ 12. Alternatively, if all three dimensions are measured in inches, divide (Thickness × Width × Length) by 144. One board foot equals 144 cubic inches of lumber.

What do 4/4, 5/4, 6/4, and 8/4 mean at a hardwood lumber yard?

Hardwood thickness is sold in quarters of an inch before surfacing: 4/4 equals 1.00" rough (planes to ~13/16" S2S), 5/4 equals 1.25", 6/4 equals 1.50", and 8/4 equals 2.00" rough (planes to ~1-3/4").

How much waste should I add when buying rough-sawn hardwood?

Add 15% to 25% extra board feet to account for sapwood, knots, end checks, saw kerfs, jointing, and planing waste—especially when selecting grain-matched panels for tabletops.

Does the Plywood Cut-List Optimizer account for saw blade kerf?

Yes. Set your table saw or track saw blade kerf (default 1/8" = 0.125", or 3/32" = 0.094" for thin-kerf blades) to lay out cabinet parts across 4×8 ft or 5×5 ft Baltic Birch sheets visually.