Guide

THE TOOLBOX / SHOP & MACHINIST REFERENCES

Fraction to Decimal Chart —
1/64" to 1" Inch, Millimeter & Wrench Guide.

Look up every 1/64-inch increment in decimal inches and millimeters, convert digital caliper measurements to the nearest fraction, match SAE to metric sockets, and print a 1-page shop PDF.

Instant Fraction ↔ Decimal ↔ Millimeter Converter

Decimal Inch
0.4063"
Millimeters
10.319 mm
Nearest 1/64"
13/32"
Δ +0.0000"
Closest Metric
10 mm
Δ +0.32 mm
Fraction (in)64thsDecimal (in)Millimeters (mm)Closest Metric SocketCopy
1/64"1/640.0156"0.397 mm1.5 mm (-1.10 mm)
1/32"2/640.0313"0.794 mm1.5 mm (-0.71 mm)
3/64"3/640.0469"1.191 mm1.5 mm (-0.31 mm)
1/16"4/640.0625"1.587 mm1.5 mm (+0.09 mm)
5/64"5/640.0781"1.984 mm2 mm (-0.02 mm)
3/32"6/640.0938"2.381 mm2.5 mm (-0.12 mm)
7/64"7/640.1094"2.778 mm3 mm (-0.22 mm)
1/8"8/640.1250"3.175 mm3 mm (+0.17 mm)
9/64"9/640.1406"3.572 mm3.5 mm (+0.07 mm)
5/32"10/640.1563"3.969 mm4 mm (-0.03 mm)
11/64"11/640.1719"4.366 mm4.5 mm (-0.13 mm)
3/16"SAE Wrench12/640.1875"4.762 mm5 mm (-0.24 mm)
13/64"13/640.2031"5.159 mm5 mm (+0.16 mm)
7/32"14/640.2188"5.556 mm5.5 mm (+0.06 mm)
15/64"15/640.2344"5.953 mm6 mm (-0.05 mm)
1/4"SAE Wrench16/640.2500"6.350 mm6 mm (+0.35 mm)
17/64"17/640.2656"6.747 mm7 mm (-0.25 mm)
9/32"18/640.2813"7.144 mm7 mm (+0.14 mm)
19/64"19/640.2969"7.541 mm8 mm (-0.46 mm)
5/16"SAE Wrench20/640.3125"7.938 mm8 mm (-0.06 mm)
21/64"21/640.3281"8.334 mm8 mm (+0.33 mm)
11/32"22/640.3438"8.731 mm9 mm (-0.27 mm)
23/64"23/640.3594"9.128 mm9 mm (+0.13 mm)
3/8"SAE Wrench24/640.3750"9.525 mm10 mm (-0.48 mm)
25/64"25/640.3906"9.922 mm10 mm (-0.08 mm)
13/32"26/640.4063"10.319 mm10 mm (+0.32 mm)
27/64"27/640.4219"10.716 mm11 mm (-0.28 mm)
7/16"SAE Wrench28/640.4375"11.112 mm11 mm (+0.11 mm)
29/64"29/640.4531"11.509 mm12 mm (-0.49 mm)
15/32"30/640.4688"11.906 mm12 mm (-0.09 mm)
31/64"31/640.4844"12.303 mm12 mm (+0.30 mm)
1/2"SAE Wrench32/640.5000"12.700 mm13 mm (-0.30 mm)
33/64"33/640.5156"13.097 mm13 mm (+0.10 mm)
17/32"34/640.5313"13.494 mm13 mm (+0.49 mm)
35/64"35/640.5469"13.891 mm14 mm (-0.11 mm)
9/16"SAE Wrench36/640.5625"14.287 mm14 mm (+0.29 mm)
37/64"37/640.5781"14.684 mm15 mm (-0.32 mm)
19/32"38/640.5938"15.081 mm15 mm (+0.08 mm)
39/64"39/640.6094"15.478 mm15 mm (+0.48 mm)
5/8"SAE Wrench40/640.6250"15.875 mm16 mm (-0.13 mm)
41/64"41/640.6406"16.272 mm16 mm (+0.27 mm)
21/32"42/640.6563"16.669 mm17 mm (-0.33 mm)
43/64"43/640.6719"17.066 mm17 mm (+0.07 mm)
11/16"SAE Wrench44/640.6875"17.462 mm17 mm (+0.46 mm)
45/64"45/640.7031"17.859 mm18 mm (-0.14 mm)
23/32"46/640.7188"18.256 mm18 mm (+0.26 mm)
47/64"47/640.7344"18.653 mm19 mm (-0.35 mm)
3/4"SAE Wrench48/640.7500"19.050 mm19 mm (+0.05 mm)
49/64"49/640.7656"19.447 mm19 mm (+0.45 mm)
25/32"50/640.7813"19.844 mm20 mm (-0.16 mm)
51/64"51/640.7969"20.241 mm20 mm (+0.24 mm)
13/16"SAE Wrench52/640.8125"20.637 mm21 mm (-0.36 mm)
53/64"53/640.8281"21.034 mm21 mm (+0.03 mm)
27/32"54/640.8438"21.431 mm21 mm (+0.43 mm)
55/64"55/640.8594"21.828 mm22 mm (-0.17 mm)
7/8"SAE Wrench56/640.8750"22.225 mm22 mm (+0.22 mm)
57/64"57/640.8906"22.622 mm23 mm (-0.38 mm)
29/32"58/640.9063"23.019 mm23 mm (+0.02 mm)
59/64"59/640.9219"23.416 mm23 mm (+0.42 mm)
15/16"SAE Wrench60/640.9375"23.813 mm24 mm (-0.19 mm)
61/64"61/640.9531"24.209 mm24 mm (+0.21 mm)
31/32"62/640.9688"24.606 mm25 mm (-0.39 mm)
63/64"63/640.9844"25.003 mm25 mm (+0.00 mm)
1"SAE Wrench64/641.0000"25.400 mm25 mm (+0.40 mm)

WORKSHOP CONVERSION GUIDE

Quick formulas and SAE-to-metric wrench equivalents.

1. Exact Inch-to-Millimeter Standard

By international yard-and-pound agreement, 1 inch = 25.4 mm exactly. Every 1/64" step equals 0.015625" or 0.396875 mm.

2. Digital Caliper to Tape Measure

Type any decimal inch or millimeter caliper measurement into the converter above to snap directly to the nearest 1/64" fraction along with the exact tolerance delta.

3. Printable Machine Shop Poster

Use the Whole Inch Offset selector to shift the table to 1"–2" or higher, then click Printable Wall Chart PDF for a crisp 2-column wall reference.

Most Common SAE Wrench to Metric Conversions

SAE FractionDecimal InchExact MillimetersClosest Metric Wrench
1/4"0.2500"6.350 mm6 mm / 6.5 mm
5/16"0.3125"7.938 mm8 mm (near exact)
3/8"0.3750"9.525 mm10 mm (0.48 mm loose)
7/16"0.4375"11.113 mm11 mm (tight)
1/2"0.5000"12.700 mm13 mm (0.30 mm loose)
9/16"0.5625"14.288 mm14 mm (tight)
5/8"0.6250"15.875 mm16 mm (near exact)
3/4"0.7500"19.050 mm19 mm (near exact)

Frequently Asked Questions

How do I convert an inch fraction to a decimal and millimeters?

Divide the numerator by the denominator to get decimal inches (for example, 13 ÷ 32 = 0.40625"). Multiply decimal inches by exactly 25.4 to get millimeters (0.40625 × 25.4 = 10.319 mm).

Can I print this fraction to decimal chart for my garage or machine shop?

Yes. Click "Printable Wall Chart PDF" to generate a clean, two-column US Letter PDF covering all 64 increments (1/64" to 1", or any whole-inch range up to 6") with 1/16" wrench sizes highlighted.

Which SAE and metric wrenches are closest equivalents?

Common near-matches include 5/16" ≈ 8 mm (7.94 mm), 3/8" ≈ 10 mm (9.53 mm, slightly loose), 7/16" ≈ 11 mm (11.11 mm), 1/2" ≈ 13 mm (12.70 mm), 9/16" ≈ 14 mm (14.29 mm), 5/8" ≈ 16 mm (15.88 mm), and 3/4" ≈ 19 mm (19.05 mm). Always use the exact system on tight or soft fasteners.

How do I find the nearest 1/64" fraction from a caliper reading?

Enter your digital caliper reading in decimal inches (like 0.406) or millimeters (like 10.3) in the top converter. It snaps to the nearest 1/64" fraction and displays the exact rounding error in inches.