Guide

THE TOOLBOX / SCHOOL & ELECTRONICS ENGINEERING

Voltage Divider Calculator —
Loaded Vout, Resistor Bands & Ohm’s Law.

Calculate exact unloaded and loaded output voltage (Vout), divider current, and resistor wattage dissipation with a live circuit schematic—plus an interactive 4-band resistor color code decoder and Ohm’s law solver.

Output Voltage (Vout) — Unloaded
3.333 V
Vin = 5VR1 (10.00 kΩ)Vout = 3.33VR2 (20.00 kΩ)
Divider Current
0.17 mA
Power in R1 / R2
0.3 / 0.6 mW
Total Heat
0.83 mW

CIRCUIT DESIGN & LOGIC SHIFTING

Designing reliable voltage dividers for sensors, ADCs, and logic levels.

1. Classic 5V-to-3.3V Logic Level Shift

Using R1 = 10 kΩ and R2 = 20 kΩ gives Vout = 5 × 20 / 30 = 3.333 V with only 0.17 mA of standby current and less than 1 mW of heat—safe for 1/8 W and 1/4 W resistors.

2. Checking Load Impedance (10× Rule)

Enter your downstream ADC or circuit input impedance into Load Resistor RL to verify how much Vout sags under load before ordering parts.

Common Voltage Divider Resistor Pairs Reference

ConversionR1 (Top)R2 (Bottom)Unloaded Vout
5V → 3.3V10 kΩ20 kΩ3.33 V
5V → 2.5V10 kΩ10 kΩ2.50 V
12V → 5V14 kΩ (or 15 kΩ)10 kΩ5.00 V (4.80 V)
12V → 3.3V27 kΩ10 kΩ3.24 V

Frequently Asked Questions

What is the voltage divider formula?

For two series resistors R1 (top) and R2 (bottom to ground) connected to input voltage Vin, the unloaded output voltage is Vout = Vin × R2 / (R1 + R2).

How does adding a load resistor (RL) affect a voltage divider?

A load connected to Vout sits in parallel with R2, lowering the effective bottom resistance to R2_eff = (R2 × RL) / (R2 + RL) and causing Vout to sag. Keep RL at least 10× larger than R2 to minimize voltage drop.

Can I use a resistive voltage divider to power a 3.3V microcontroller from 5V?

No—resistive dividers are ideal for low-current logic signals and ADC sensing (e.g., stepping a 5V UART TX line down to 3.3V with 10 kΩ and 20 kΩ), not for supplying variable power current. Use an LDO or buck regulator for power rails.

How do I read a 4-band resistor color code?

Bands 1 and 2 give the first two significant digits, Band 3 is the decimal multiplier (10^n), and Band 4 is the tolerance (Gold = ±5%, Brown = ±1%). For example, Brown-Black-Orange-Gold equals 10 × 1,000 = 10 kΩ ±5%.