Guide

THE TOOLBOX / HOME & WINTER SAFETY

Roof Snow Load Calculator —
Snow Weight (lbs/sq ft), Total Tons & Ice Dam Risk Estimator.

Calculate exact roof snow weight across mixed layers of dry powder, wind-packed snow, rain-soaked snow, and solid ice—adjusted for roof pitch, design capacity, and attic ice-dam risk.

Scenario:

1. Snowpack Layers (Inches)

Total Depth: 14.0"
2"
4"
8"
0"

2. Roof Geometry & Capacity

Roof Snow Load AnalysisHigh Load — Clear Snow Soon
Roof Load
24.4
lbs / sq ft (psf)
Total Weight
22.0t
43,992 lbs
Ice Dam Risk
High Risk
Score 90/100
Capacity Used vs. 30 psf Design Rating81%

Equivalent to roughly 9.8 mid-size SUVs parked on your roof (slope factor Cs = 1.00).

4/12 PITCH · 1,800 SQ FT
Recommended Action

Approaching rated capacity. Hire an insured snow-removal pro or safely rake from the ground. Watch for sticking interior doors.

SNOW DENSITY REFERENCE

Weight of Snow & Ice per Inch of Roof Depth.

Precipitation LayerDensity (lb/ft³)Weight per Inch (psf)Depth to Hit 20 psf
Fresh Dry Powder~6.2 lb/ft³0.52 lbs/sq ft~38 inches
Settled / Wind-Packed Snow~16.2 lb/ft³1.35 lbs/sq ft~15 inches
Wet Heavy / Rain-Soaked~27.0 lb/ft³2.25 lbs/sq ft~9 inches
Solid Ice / Refrozen Crust~57.0 lb/ft³4.75 lbs/sq ft~4.2 inches

2. Engineering Note

This calculator provides quick educational estimates for uniform snowpacks. Drifting in roof valleys, sliding snow from upper stories, or older framing can create local point loads higher than the roof average.

Frequently Asked Questions

How much snow weight can a residential roof safely hold?

Most modern residential roofs in the northern United States are engineered for 20 to 40 pounds per square foot (psf) of live snow load, while heavy snowbelt and alpine regions require 50 to 70+ psf. Older homes, flat roofs, porches, and detached sheds often have lower capacity (~20 psf). Always check local building codes or a structural engineer if unsure.

Why does wet snow weigh so much more than dry powder?

Fresh dry powder is mostly trapped air and weighs roughly 5–7 lbs per cubic foot (~0.52 psf per inch). Heavy wet snow or rain-soaked snow holds far more liquid water and weighs 25–30 lbs per cubic foot (~2.25 psf per inch)—more than 4× heavier per inch. Just 1 inch of solid ice weighs ~4.75 psf, equal to nearly 9 inches of dry powder.

When should I rake snow off my roof?

FEMA and home-safety inspectors generally recommend clearing snow once estimated roof load approaches 15–20 psf (about 18–24 inches of fresh snow, or 8–10 inches of heavy wet snow), especially if rain is forecast on top of existing snowpack. Always use a telescoping roof rake from the ground rather than climbing onto an icy roof.

What are the warning signs of roof structural overload?

Warning signs include creaking, cracking, or popping noises in the attic, interior doors or windows suddenly sticking or refusing to latch, visible sagging in the ridge or ceiling drywall, and fresh diagonal cracks near upper doorframes. If you observe these, evacuate the structure and call a licensed structural professional.

How do ice dams form and how do I prevent them?

Ice dams form when warm air leaks into the attic and melts the underside of roof snow while outdoor temperatures stay below freezing (typically 20°F–32°F). Meltwater runs down to the cold overhang eaves and refreezes into a thick ridge of ice that forces water back under shingles. Raking the bottom 3–4 feet of snow and improving attic air sealing + R-49 insulation prevent ice dams.

Does a steeper roof hold less snow?

Yes. Per ASCE 7 roof snow load engineering guidelines, roofs steeper than 30° (about 7/12 pitch) shed snow more readily—and slippery standing-seam metal roofs begin shedding above 15° (about 3.5/12 pitch). Flat and low-slope roofs retain 100% of fallen snow and are also prone to wind-drift pooling.