1. Related Homestead & Outdoor Tools
Plan your acreage projects with our Living Tree Age Estimator, Maple Syrup Sap Calculator, Rope & Knot Working Load Calculator, and Space Heater & Wood Stove BTU Calculator.
THE TOOLBOX / FIREWOOD & HOMESTEAD
Match your log diameter, wood hardness, and yearly firewood cords to the right log splitter tonnage (electric vs. gas hydraulic) and chainsaw bar length.
Sweet spot for homeowners burning 3–6 cords of oak, ash, or green hardwood.
Est. 6.0 hrs/yr splitting 4 full cord(s) · 50:1 mix = 2.6 oz oil/gal.
SIZING QUICK CHART
| Log Diameter | Splitter Tonnage | Chainsaw Bar | Engine Size |
|---|---|---|---|
| Up to 10–12″ | 5 – 7 Ton Electric | 14″ – 16″ | 35 – 42 cc / Battery |
| 14″ – 20″ Hardwood | 22 – 27 Ton Gas | 18″ – 20″ | 50 – 60 cc |
| 22″ – 32″ Knotty / Green | 30 – 37+ Ton Gas | 20″ – 24″ | 65 – 80+ cc |
Plan your acreage projects with our Living Tree Age Estimator, Maple Syrup Sap Calculator, Rope & Knot Working Load Calculator, and Space Heater & Wood Stove BTU Calculator.
Pair any gas or high-voltage battery saw with Kevlar chainsaw chaps, eye and ear protection, leather gloves, and steel-toe boots—and never run a gas splitter indoors.
For typical 14–20 inch oak, ash, or maple rounds, a 22-to-27-ton horizontal/vertical gas splitter is the homeowner sweet spot. Step up to 30–37 tons if you regularly split 24″+ green oak or stringy, knotty elm and hickory.
Yes—for light fireplace or firepit use (1–2 cords/year) with straight-grained logs up to 10–12 inches wide, a 5-to-7 ton electric splitter is quiet, low-maintenance, and safe to run inside a garage.
Pick a guide bar at least 2 inches longer than your typical log diameter for clean single-pass bucking—or up to half the tree diameter when making two-sided felling cuts. A 16″–18″ bar (45–55cc saw) handles 90% of homeowner firewood.
A 24-inch green oak round weighs over 150 pounds. Flipping the beam into vertical mode lets you roll heavy rounds directly onto the footplate on the ground instead of lifting them waist-high.
A 50:1 fuel mix uses exactly 2.6 fluid ounces of 2-cycle engine oil per 1 US gallon of fresh 89+ octane ethanol-free gasoline.
Yes—get instant tonnage, bar-length, engine cc, and annual splitting time estimates in your browser.