Guide

THE TOOLBOX / HOMESTEAD & KITCHEN

Maple Syrup Sap Calculator —
Rule of 86 Boil Ratio, Finish Temp & Tap Yield.

Calculate exact sap-to-syrup yield for sugar maple, red maple, walnut, or birch sap using the Rule of 86—plus elevation-adjusted finishing boil temperature and evaporation time.

Finished Maple Syrup
1.01 gal
8.1 US pints · 129 fl oz
Sap-to-Syrup Ratio
39.6 : 1
Needs 40.0 gal raw sap
Finish Boil Temp
217.5°F
103.1°C (Water BP: 210.4°F)
Est. Boil Time
11.1 hrs
Evaporating 39.0 gal (~24 lb propane)
Backyard Season Forecast (10 taps @ ~10 gal/tap): ~100 gal sap → 2.52 gal (20.2 pints) finished syrup.

RULE OF 86 REFERENCE

Sap Sugar (% Brix) to Finished Syrup Ratio by Tree Species.

Tree SpeciesTypical Sap BrixSap : Syrup RatioSyrup From 40 Gal Sap
Sugar Maple2.0% – 2.5%35:1 – 43:1~1.0 gal (4 qt)
Red / Black Maple1.6% – 1.9%45:1 – 54:1~0.8 gal (3.2 qt)
Paper Birch0.9% – 1.1%78:1 – 95:1~0.45 gal (1.8 qt)

2. Filter Hot at 190°F+

Pour finished syrup through a pre-wetted wool or Orlon maple filter while hot (190°F+) to remove mineral nitre ("sugar sand") and keep bottles crystal clear.

Frequently Asked Questions

What is the Rule of 86 for making maple syrup?

The Jones Rule of 86 states that you divide 86 by your sap’s sugar percentage (% Brix) to find how many gallons of raw sap it takes to make 1 gallon of 66% Brix maple syrup. For example, 2.0% Brix sap requires 86 ÷ 2.0 = 43 gallons of sap per gallon of syrup.

What temperature is maple syrup finished boiling?

Finished Grade A maple syrup (66.9% Brix) boils at 7.1°F (3.9°C) above the local boiling point of water on that day. At sea level (water boils at 212°F), syrup finishes at 219.1°F. Always test boiling water right before finishing because barometric pressure and elevation shift the boiling point.

How much maple syrup do you get from one tree tap?

A healthy sugar maple tap produces an average of 10 gallons of sap over a 4-to-6-week spring sugaring season, which boils down to roughly 1 quart (0.25 gallon) of finished pure maple syrup.

Why does birch or silver maple sap take longer to boil?

Paper birch sap averages around 1.0% sugar (requiring ~86–100 gallons per gallon of syrup), and silver maple averages 1.5% (~57:1), whereas sugar maples typically run 2.0%–2.5% Brix (~35:1 to 43:1).

What happens if I under-boil or over-boil maple syrup?

Under-boiled syrup (below 66% Brix) tastes thin and can ferment or grow mold in storage. Over-boiled syrup (above 68% Brix) crystallizes into rock sugar ("sugar sand" crystals) at the bottom of the jar.

Is this maple syrup sap calculator free to use?

Yes—everything calculates instantaneously in your browser with both US gallons and metric liters.