Clay Shrinkage Calculator — Pottery Wet-to-Fired, 3D Volume & Test Bar Tool.
Calculate exact wet throwing dimensions for any target finished ceramic size, predict 3D cubic mug volume shrinkage, and measure exact clay body shrinkage from a fired test bar.
Clay Bodies:
1. Clay Shrinkage RateCone 6 (2232°F / 1222°C)
12.0%
2. Desired Finished Dimensions (in)
Throw Wet to These DimensionsVolume loss: 31.9%
Width / Rim
3.98 in
Height
4.83 in
Foot / Lid
3.13 in
Vessel Volume (3D Cubic Shrinkage):17.6 fl oz wet (521 mL) → 12.0 fl oz fired (355 mL)
Stage-by-Stage Dimensional Progression
Stage
Width
Height
Foot / Lid
1. Wet Thrown
3.98 in
4.83 in
3.13 in
2. Bone-Dry (Greenware)
3.74 in
4.54 in
2.94 in
3. Final Glaze-Fired
3.50 in
4.25 in
2.75 in
CERAMIC CLAY BODY REFERENCE
Typical linear vs. 3D volume shrinkage by clay body and kiln cone.
Clay Body
Firing Cone
Linear Shrinkage
3D Volume Loss
Porcelain
Cone 10 (2345°F)
13% – 15%
34% – 39%
Mid-Fire Stoneware (B-Mix)
Cone 6 (2232°F)
11% – 13%
30% – 34%
Earthenware / Terracotta
Cone 04 (1945°F)
5% – 8%
14% – 22%
Grogged Sculpture / Raku
Cone 06 – 6
5% – 7%
14% – 20%
Polymer Clay (Sculpey / Fimo)
275°F Oven
1% – 2%
3% – 6%
1. Worked Example: Throwing a True 12 oz Coffee Mug
With a 12% stoneware clay, a finished 12 fl oz mug loses 31.9% of its internal volume in the kiln. You must throw a wet interior volume of 12 ÷ (0.88)³ = 17.6 fl oz so the fired mug holds a full 12 oz.
2. Why Dividing Beats Multiplying
A common studio mistake is adding 12% (`× 1.12`) instead of dividing by `0.88`. For a 10-inch dinner plate, `10 × 1.12 = 11.2"` shrinks down to `9.86"`, whereas `10 ÷ 0.88 = 11.36"` fires to an exact 10.00 inches.
How do you calculate wet throwing size for a target fired pottery dimension?
Divide your desired finished dimension by (1 − shrinkage rate). For example, to finish a 4.0-inch tall mug in a 12% shrinkage stoneware clay, throw it to 4.0 ÷ (1 − 0.12) = 4.55 inches tall—not 4.0 × 1.12 (which under-sizes the mug at 4.48 inches).
Why does mug volume shrink so much more than linear height?
Because clay shrinks in all three dimensions (width, depth, and height), volume shrinks cubically: Fired Volume = Wet Volume × (1 − s)³. A 12% linear shrinkage causes a 31.9% drop in interior fluid capacity!
How much do porcelain, stoneware, and earthenware clays shrink?
Typical wet-to-fired total shrinkage is 13%–15% for Cone 10 porcelain, 11%–13% for Cone 6 stoneware (such as B-Mix or Speckled Buff), 5%–8% for Cone 04 terracotta/earthenware, and 1%–2% for oven-baked polymer clay.
How do I measure my exact clay shrinkage with a test bar?
Roll a slab tile, mark an exact 100 mm line with a needle tool, let it bone-dry, and glaze fire it to your studio cone. Subtract the final millimeter length from 100 to read your exact shrinkage percentage directly (e.g., 88 mm = 12% shrinkage).
Does clay shrink equally horizontally and vertically?
Mostly, though slab-built pieces can shrink 1%–2% more along the direction of rolling, and tall wheel-thrown cylinders can shrink slightly more vertically due to gravity and kiln shelf friction at the base.
Does this clay shrinkage calculator work offline in the studio?
Yes. Everything runs 100% locally in your browser with no logins, ads, or server calls.