1. Double-Cup Mixing Prevents Sticky Spots
Scrape the sides and bottom of your first bucket for 3 minutes, pour the mix into a clean second bucket, and stir another 2 minutes. This eliminates unmixed resin along the bucket wall that never cures.
THE TOOLBOX / WOODWORKING & CRAFTS
Calculate exact epoxy resin and hardener amounts in fl oz, mL, gallons, or grams for river tables, bar tops, coasters, and round molds—with built-in waste margins and pour-depth warnings.
EPOXY COVERAGE & POUR DEPTH REFERENCE
| Epoxy Type | Typical Mix Ratio | Max Single Pour | Cure Time |
|---|---|---|---|
| Seal / Skim Coat | 1:1 by volume | 1/16" (1.5 mm) | 4–6 hrs tack-free |
| Tabletop / Flood Coat | 1:1 by volume | 1/8"–1/4" (3–6 mm) | 24 hrs hard cure |
| Deep Pour / River Table | 2:1 by volume | 1"–2" (25–50 mm) | 48–72 hrs full cure |
| Industrial Casting | 3:1 by volume | 2"–4" (50–100 mm) | 72+ hrs full cure |
Scrape the sides and bottom of your first bucket for 3 minutes, pour the mix into a clean second bucket, and stir another 2 minutes. This eliminates unmixed resin along the bucket wall that never cures.
Brush a razor-thin seal coat onto porous live-edge slabs first and let it gel for 4–6 hours. Sealing locks air inside the wood grain so bubbles don't rise into your main pour.
Formulate handmade soap batches with our Soap Lye Calculator, size candle wax & fragrance oil in the Candle Wax Calculator, or check shelf sag in the Wood Shelf Sagulator.
Multiply length × width × pour depth in inches to get cubic inches, then multiply by 0.554 to convert to US fluid ounces (or by 16.387 for milliliters). Always add 10% extra to account for resin left stuck to mixing cups and stir sticks.
Use 1:1 tabletop/art epoxy for flood coats, bar tops, charcuterie boards, and thin coasters up to 1/4 inch (6 mm) thick. Use 2:1 deep-pour casting epoxy for thick river tables and deep molds (1/2 inch to 2 inches) so the slower cure prevents overheating, cracking, and yellowing.
One US gallon (128 fl oz) of mixed epoxy covers roughly 12.8 square feet at a standard 1/8-inch (3 mm) flood coat, or about 25.6 square feet at a thin 1/16-inch seal coat.
Always check your resin manufacturer’s label. Most craft and river-table epoxies are formulated by volume (e.g. 1:1 or 2:1 by volume), which translates to a slightly different weight ratio because Part A resin (~1.15 g/mL) is denser than Part B hardener (~1.05 g/mL).
Keep mica powder around 1% to 2% of total resin weight (roughly 1 teaspoon per 8 fl oz) and never exceed 5%–6% total colorant, as excess pigment can interfere with curing.
Between 5% and 10% of mixed epoxy clings to the walls of mixing buckets, stir paddles, and drips over edges during a flood coat. Adding 10% prevents running short mid-pour.