Guide

THE TOOLBOX / WOODWORKING & DIY

Sagulator —
Wood Shelf Sag, Span & Load Capacity Calculator.

Predict exact shelf deflection for plywood, MDF, melamine, oak, maple, and pine using Euler-Bernoulli beam physics—complete with front edging strip stiffening, shelf self-weight, and L/600 woodworking sag ratings.

Load Presets:
1. Shelf Material & Dimensions
2. Load & Support Type
Load Distribution
Calculated Shelf DeflectionBorderline Sag
Sag Per Foot of Span
0.029"/ft
Limit: ≤ 0.020"/ft · Ratio L/408
Total Center Deflection
0.088"
2.24 mm · 98.1 lb total load

Slight sag may become noticeable over time (wood creep). Consider a front edging strip or thicker stock.

Exaggerated Beam Deflection ProfileI = 0.422 in⁴ · Self-weight 8.1 lb
Span: 36" · Center Sag: 0.088" (2.2 mm)

WOOD STIFFNESS & MAX SPAN REFERENCE

Modulus of elasticity and typical max spans for 3/4" shelving.

Shelf Material (3/4" × 12")Modulus E (psi)DensityMax Flat Span (30 lb/ft)
Hard Maple / Red Oak1,820,000 – 1,830,00044 lb/ft³~38 in
Baltic Birch Plywood1,600,00043 lb/ft³~36 in
Douglas Fir Plywood1,500,00034 lb/ft³~35 in
Eastern White Pine1,240,00025 lb/ft³~33 in
MDF / Particleboard350,000 – 400,00045 – 48 lb/ft³~22 – 24 in

1. Worked Example: Rescuing a 36" MDF Bookcase

A 36" × 12" × 3/4" MDF shelf holding 30 lb/ft of hardcovers sags 0.077 in/ft (nearly 4× the acceptable limit). Adding a glued 1.5" × 3/4" front edging strip drops deflection into the safe zone without adding a middle divider.

2. Euler-Bernoulli Deflection Equation

For a simply supported shelf with uniform load W, center deflection is δ = 5 W L³ / (384 E I). Because span L is cubed, cutting an unsupported span in half reduces sag by a factor of 8×.

Frequently Asked Questions

What is the Sagulator and how much shelf sag is acceptable?

The Sagulator is a classic woodworking beam-deflection calculator that predicts how much a wood or sheet-goods shelf will bow under load. Woodworkers treat 0.020 inches of sag per foot of span (L/600) as the upper limit for an imperceptible, visually flat shelf.

Why does shelf thickness affect sag so much more than shelf depth?

In the Euler-Bernoulli beam formula, moment of inertia I = (b × h³) / 12. Doubling shelf depth (b) only halves the sag, whereas doubling shelf thickness (h) increases stiffness by 8× (2³) and cuts sag by 87.5%.

How much does a front edging strip stiffen a plywood or MDF shelf?

Gluing a 1.5" tall × 0.75" thick hardwood edging strip along the front edge turns a flat 3/4" shelf into an L-beam, often cutting total deflection by 60%–75% without changing the look of a slim shelf.

Is 3/4" plywood or 3/4" MDF better for a 36-inch bookshelf?

Plywood is nearly 4× stiffer than MDF (modulus of elasticity ~1.5M–1.6M psi vs. 400,000 psi for MDF). At a 36-inch span with 30 lb/ft of hardcover books, unsupported 3/4" MDF will visibly bow, while Baltic birch plywood stays well within acceptable limits.

How heavy are hardcover books, vinyl records, and garage totes per foot?

Plan for 20 lb/ft for paperbacks, 25–30 lb/ft for hardcover books, 35 lb/ft for 12-inch vinyl LPs, and 45–60 lb/ft for loaded garage storage totes, canned goods, or paint cans.

Does this shelf sag calculator account for shelf self-weight?

Yes. It automatically calculates the weight of the wood shelf (and any optional front edging strip) from its density and adds it to your applied load.