Guide

THE TOOLBOX / CRAFTS & FIBER ARTS

Cross Stitch Calculator —
Aida & Linen Fabric Cut Size & Floss Skein Estimator.

Enter your pattern’s stitch count, fabric count (Aida or Linen over 1 / over 2), and framing margin to get exact finished dimensions, fabric cut size, and estimated DMC floss skeins.

Quick Presets:
1. Pattern Stitch Count & Fabric
Stitching Method
3.00"
Finished Design Area
10.00" × 12.86"
Effective count: 14 stitches/in
Fabric Cut Size (w/ Margin)
16.00" × 18.86"
Est. floss: ~29 total 8m skeins
Design: 10.00" × 12.86"140 × 180 sts (14ct over 1)Cut Width: 16.00"+3.00" framing margin on all 4 sides · Cut Height: 18.86"
Same Pattern Across Popular Fabric Counts
FabricDesign SizeCut Size (+3.00"/side)
11ct Aida12.73" × 16.36"18.73" × 22.36"
14ct Aida10.00" × 12.86"16.00" × 18.86"
16ct Aida8.75" × 11.25"14.75" × 17.25"
18ct Aida7.78" × 10.00"13.78" × 16.00"
28ct Linen (Over 2)10.00" × 12.86"16.00" × 18.86"
32ct Linen (Over 2)8.75" × 11.25"14.75" × 17.25"
36ct Linen (Over 2)7.78" × 10.00"13.78" × 16.00"

AIDA & LINEN EQUIVALENCY CHART

Standard cross-stitch fabric counts, over-2 equivalents, and strand guides.

Aida CountLinen Equivalent (Over 2)Stitches / InchRecommended Strands
11-count Aida22-count Hardanger113 strands
14-count Aida28-count Linen / Evenweave142 strands (or 3 for fuller coverage)
16-count Aida32-count Linen / Evenweave162 strands
18-count Aida36-count Linen182 strands (or 1 for airy look)

1. Worked Example: 140 × 180 Stitches on 14ct Aida

Dividing 140 ÷ 14 = 10.0" wide and 180 ÷ 14 = 12.86" tall. Adding a 3" margin on all four sides (+6" total) gives a fabric cut size of 16.0" × 18.86".

2. Prevent Fraying Before You Start

Whip-stitch, zigzag-stitch, or apply painter’s tape around the cut edges of your Aida or linen so your framing margin stays intact through months of stitching.

Frequently Asked Questions

How do you calculate cross-stitch fabric size?

Divide your pattern’s stitch width and height by the effective fabric count (stitches per inch) to get the finished design size, then add twice your border margin (typically 6 inches total for a 3-inch framing border on every side).

What does stitching "over 2" on 28-count or 32-count linen mean?

Stitching over 2 fabric threads halves the effective stitch count—so 28-count linen stitched over 2 produces the exact same 14 stitches per inch as 14-count Aida, and 32-count linen over 2 equals 16-count Aida.

How much extra fabric margin should I leave for framing?

Professional framers recommend at least 3 inches on every side (adding 6 inches to both width and height) so the fabric can be laced tautly around acid-free mounting board. For hoop finishes or bookmarks, 2 inches per side is usually sufficient.

How many strands of DMC floss should I use for each fabric count?

Most stitchers use 3 strands on 11-count Aida, 2 strands on 14-, 16-, and 18-count Aida (or 28/32ct linen over 2), and 1 strand on 25-count+ stitched over 1.

How many stitches are in one 8-meter DMC embroidery floss skein?

Using 2 strands on 14-count Aida, one 8-meter (8.7-yard) 6-strand DMC skein yields roughly 1,400 to 1,800 full cross stitches depending on tension and how far you carry thread on the back.

Does this cross-stitch calculator support centimeters and inches?

Yes. Toggle between Inches and cm at the top right to view finished dimensions, margins, and the full fabric-count comparison table in metric or imperial.