Wallpaper Calculator — Roll Count, Pattern Repeat & Cut Plan.
Estimate exact wallpaper rolls for single accent walls or full rooms—factoring in US double rolls, Euro rolls, straight or half-drop pattern repeats, doors, windows, and dye-lot spares.
Rolls to Order
12
11 exact + 1 spare roll
Vertical Strips
33
3 usable drops / roll
Net Wall Area
426 ft²
~37% pattern & trim waste
Estimated Material Cost
$696
At $58/roll
1. Room Walls (Feet)
W
H
W
H
W
H
W
H
2. Roll Dimensions & Pattern Repeat
Wall Strip Cut-Plan (Feature Wall (North))
9 vertical panels · 10.00 ft cut length per strip (3 drops/roll)
Wall
Strips
Cut Drop
Drops/Roll
Feature Wall (North)
9
10.00 ft
3
East Wall
8
10.00 ft
3
South Wall
9
10.00 ft
3
West Wall
8
10.00 ft
3
WALLPAPER ORDERING GUIDE
Standard roll sizes and how to avoid running short mid-wall.
1. Measure Wall-by-Wall (Not Just Square Footage)
Simple area division underestimates rolls because partial leftover pieces at the end of a roll cannot span a full ceiling height. This calculator counts exact vertical strips and whole usable drops per roll.
2. Account for Trim & Pattern Repeat
Keep at least 4 inches of top-and-bottom trim allowance for uneven ceilings and baseboards, and enter the exact Pattern Repeat printed on the wallpaper sample label.
3. Order All Rolls in One Dye Lot
Check that every roll shares the same batch/run number before cutting. Keeping +1 spare roll checked prevents mismatched shades if a strip tears.
Divide each wall’s width by the roll width (typically 20.5 inches or 53 cm) and round up to find the number of vertical strips. Divide the roll length by your ceiling height plus trim and pattern repeat to get usable drops per roll, then divide total strips by drops per roll and round up.
Why does pattern repeat increase the number of wallpaper rolls?
When wallpaper has a 12" or 24" straight or half-drop pattern repeat, every strip must be cut to a multiple of the repeat so motifs align seamlessly across seams. That alignment waste can reduce a 33-foot double roll from 3 usable drops down to 2.
What is the difference between a US single roll and a US double roll?
A US single roll is 20.5" × 16.5 ft (~28 sq ft), while a US double roll is 20.5" × 33 ft (~56 sq ft). Almost all manufacturers price by the single roll but ship physically packaged in continuous double rolls to minimize waste.
Should I always buy one extra roll of wallpaper?
Yes. Wallpaper is printed in dye lots (batch numbers) that can shift slightly in shade between print runs. Ordering one extra roll from the same batch protects against mis-cuts and future wall repairs.
What is a half-drop match vs. a straight match?
In a straight match, the pattern aligns horizontally at the exact same height on every strip. In a half-drop match, every second strip shifts vertically by half the pattern repeat, creating a diagonal flow that uses slightly more paper.