Guide

THE TOOLBOX / AUDIO & HARDWARE TESTS

Left Right Speaker Test —
Stereo Balance, Phase & Frequency Check.

Verify Left and Right headphone or speaker channels with one click, run an automatic L→R ping, diagnose reversed 180° speaker polarity, and sweep 20 Hz to 20 kHz locally.

Acoustic Reference Frequency Presets (Click to Audition)

Stereo Routing & Phase Matrix

Left Gain
0.28
Right Gain
0.28
Phase
0° Sync
Quick Diagnostic Checklist
• Swapped Channels: Left plays in right ear → check RCA cables or OS stereo balance.
• Reversed Polarity: 180° Out-of-Phase sounds fuller than Center → flip +/− wire on one speaker.
• Driver Rattle: Buzzing at 40–80 Hz → loose enclosure screw or blown woofer surround.
Click Left Speaker, Right Speaker, or Stereo Ping to test your headphones or monitors.

STEREO DIAGNOSTIC GUIDE

Diagnosing swapped L/R channels, reversed speaker wires, and driver rattles.

1. True Channel Isolation (Zero Crosstalk)

Each channel routes through a dedicated 2-channel Web Audio ChannelMergerNode, ensuring 100% Left or 100% Right signal output for headphones, earbuds, laptops, and studio monitors.

2. 180° Speaker Wiring Polarity Check

Reversing the red (+) and black (−) leads on one bookshelf speaker cancels low-end bass. Toggle between Center In-Phase and 180° Out-of-Phase at 60–120 Hz to catch polarity errors instantly.

3. Sub-Bass to Treble Sweep

Use the 20 Hz–20 kHz Sweep or discrete frequency presets to spot cabinet buzzes, dead tweeters, or imbalanced earcup drivers.

Frequently Asked Questions

How do I run a left right speaker test on headphones or studio monitors?

Click the big LEFT SPEAKER (L) button, then RIGHT SPEAKER (R), or tap Auto Left → Right Ping. The Web Audio API routes a clean sine burst strictly to one stereo channel at a time with zero crosstalk so you can immediately verify L/R placement and volume balance.

How does the 180° out-of-phase speaker polarity test work?

Click Center In-Phase (L+R) first: bass and pitch should lock tightly dead-center between your speakers. Then click 180° Out-of-Phase: correctly wired speakers sound wide, hollow, and bass-cancelled. If out-of-phase sounds fuller than in-phase, one speaker’s positive/negative wires are reversed.

Why does the test use short 1.25-second fade-in bursts instead of loud loops?

Envelope-shaped 1.25-second bursts prevent ear fatigue, speaker pops, and tweeter voice-coil heating while making room reflections and driver rattles easy to hear.

Does this left right speaker test need microphone permission?

No. All tones and sweeps are synthesized locally to your speakers or headphones via the Web Audio API without requesting microphone access.