Guide

THE TOOLBOX / HARDWARE & AUDIO DIAGNOSTICS

Microphone level & gain,
measured in real time.

Verify your microphone input volume, RMS dBFS level, and 0 dBFS peak clipping locally in your browser.

MICROPHONE HARDWARE & CONTROLS
●   100% Local Web Audio API
FREQUENCY SPECTRUM & VU METERSilent / Muted
50 Hz1 kHz8 kHz16 kHz
VU Volume LevelSilent
−60 dB−36 dB−18 dB−6 dB0 dB (CLIP)
RMS dBFS
−∞
Peak Hold
−∞
Clipping Alert
NONE
Input Mode
Idle
Diagnostic: No audio detected. Check if your hardware mute switch is engaged or if your browser has microphone permission.

THE DETAILS

How RMS dBFS and peak clipping detection work in the Web Audio API.

1. Time-Domain RMS Metering

Samples 1,024 float32 PCM frames per animation frame to compute root-mean-square decibels full-scale (dBFS).

2. 0 dBFS Peak Clipping Guard

Flags input peaks reaching 98%–100% amplitude so you can lower preamp gain before recording a distorted podcast or call.

3. Immediate Stream Release

Closes the `AudioContext` and stops all `MediaStreamTrack` handles the instant you click Stop Microphone.

Frequently Asked Questions

Does this microphone test upload or store my voice?

No. Your microphone audio is analyzed in real time inside your browser’s Web Audio API AnalyserNode and never leaves your device.

What is a healthy microphone dBFS level for calls and recording?

Normal speaking voice should register between -24 dBFS and -12 dBFS with peaks staying safely below 0 dBFS to avoid digital clipping distortion.

Why does the meter show Silent / Muted?

Check if your headset hardware mute switch is engaged or select the correct input device in your system sound settings.

How is dBFS calculated from float32 audio samples?

dBFS (decibels relative to full scale) is computed as 20 * log10(RMS) where RMS is the root-mean-square of time-domain PCM samples bounded between -1.0 and +1.0. A maximum amplitude sine wave registers 0 dBFS, while background room quiet typically registers below -55 dBFS.

Can I test my microphone without granting browser audio permissions?

Yes, click "Simulate Speech Signal" to generate an in-memory multi-harmonic vocal waveform (160 Hz fundamental with formants) to test the FFT frequency spectrum visualizer, VU meter, and clipping detection with zero permissions.