1. Related Aquarium & Water Tools
Keep your tanks thriving with our Fish Tank Weight & Floor Load Calculator, Aquarium Water Change Calculator, Aquarium Heater Wattage Calculator, and Langelier Saturation Index Calculator.
THE TOOLBOX / AQUASCAPING & AQUARIUMS
Calculate dissolved CO2 in ppm from your aquarium’s pH and carbonate hardness (dKH), simulate 4 dKH drop-checker colors, and find your exact 30 ppm target pH and starting bubble rate.
Sweet spot for lush pearling growth while keeping fish and shrimp comfortable.
Important: The pH/KH formula assumes carbonate alkalinity is the only buffer. Active buffering aquasoils (ADA Amazonia, Fluval Stratum), driftwood tannins, or phosphate buffers lower pH independently—always verify with a 4 dKH reference drop-checker or measure a ~1.0 pH drop from degassed tap/tank water.
| pH \ dKH | 2 dKH | 3 dKH | 4 dKH | 6 dKH | 8 dKH | 10 dKH |
|---|---|---|---|---|---|---|
| 6.2 | 38 | 57 | 76 | 100+ | 100+ | 100+ |
| 6.4 | 24 | 36 | 48 | 72 | 96 | 100+ |
| 6.6 | 15 | 23 | 30 | 45 | 60 | 75 |
| 6.8 | 10 | 14 | 19 | 29 | 38 | 48 |
| 7.0 | 6 | 9 | 12 | 18 | 24 | 30 |
| 7.2 | 4 | 6 | 8 | 11 | 15 | 19 |
| 7.4 | 2 | 4 | 5 | 7 | 10 | 12 |
DROP-CHECKER COLOR KEY
| Drop-Checker Color | Approx. CO2 | Fish Safety | Action |
|---|---|---|---|
| Deep Blue | < 15 ppm | Very Safe | Increase BPS slowly if running medium/high light |
| Emerald / Lime Green | 20 – 35 ppm | Optimal | Maintain steady injection 1 hr before lights |
| Bright Yellow | 40+ ppm | Risk of Gasping | Turn down CO2 & add air stone / surface ripple |
Keep your tanks thriving with our Fish Tank Weight & Floor Load Calculator, Aquarium Water Change Calculator, Aquarium Heater Wattage Calculator, and Langelier Saturation Index Calculator.
A glass drop-checker lags behind real tank CO2 levels by 1 to 2 hours while gas diffuses across the air pocket—never crank the needle valve aggressively based on an instant reading.
Most planted aquariums thrive at 20 to 30 ppm of dissolved CO2 (lime-green on a 4 dKH drop-checker). Below 15 ppm, high-light plants stall and invite Black Beard Algae; above 40 ppm, fish and shrimp experience oxygen stress.
The standard carbonate equilibrium formula is CO2 (ppm) = 3 × dKH × 10^(7 − pH). Each 1.0 full-unit drop in pH at constant KH multiplies dissolved CO2 by roughly 10×.
Active soils like ADA Amazonia or Fluval Stratum absorb KH and release humic acids that drop pH even without CO2. In aquasoil tanks, use a glass drop-checker filled with a dedicated 4 dKH reference solution (never tank water) or track a 1.0 pH drop between morning degassed water and midday injection.
A safe starting point is 1 bubble per second per 20 US gallons of tank volume, turning CO2 on 1 hour before lights come on and off 1 hour before lights shut off. Adjust gradually over 3–4 days while watching your drop-checker and fish behavior.
No! Injecting CO2 creates carbonic acid which lowers pH, but it does not change carbonate hardness (KH). When CO2 gases off overnight, pH rises back to its baseline.
Yes—check your CO2 ppm, drop-checker color, target 30 ppm pH, and starting BPS instantly in your browser.