Guide

THE TOOLBOX / POOL & WATER CHEMISTRY

Langelier Saturation Index (LSI) Calculator —
Pool Water Balance & CYA-to-Chlorine Targets.

Check whether your pool or hot tub water is corrosive, balanced, or scale-forming using CYA-corrected LSI math—plus exact Free Chlorine minimums, daily targets, and SLAM shock levels.

Preset:
5 ppm
LSI Water BalanceIdeal LSI Balance
-0.00Corrected Carb Alk: 77 ppm
-1.0 Corrosive-0.30 to +0.30 Ideal+1.0 Scaling

Water sits squarely inside the -0.30 to +0.30 balanced zone—protecting plaster, vinyl, and heat exchangers.

CYA 40 ppm → Free Chlorine TargetsSanitized (At/Above Target)
Minimum FC
3 ppm
Daily Target
4.6 ppm
SLAM / Shock
16 ppm

CYA TO CHLORINE CHART

Free Chlorine Targets by Cyanuric Acid (Stabilizer) Level.

CYA (ppm)Min FC (7.5%)Daily Target (11.5%)SLAM Shock (40%)
30 ppm2.3 ppm3.5 – 4.0 ppm12 ppm
40 ppm3.0 ppm4.5 – 5.0 ppm16 ppm
50 ppm3.8 ppm6.0 ppm20 ppm
70 ppm (SWG)5.3 ppm8.0 ppm28 ppm

2. Test Kit Recommendation

For reliable LSI readings, use a FAS-DPD liquid drop test kit (such as Taylor K-2006) rather than dip strips, which often misread Calcium Hardness and CYA.

Frequently Asked Questions

What is a good Langelier Saturation Index (LSI) for a swimming pool?

Keep your pool’s LSI between -0.30 and +0.30 (ideally close to 0.00). Below -0.30, water becomes corrosive and dissolves calcium out of plaster, grout, and metal heat exchangers; above +0.30, calcium carbonate precipitates out as cloudy water and crusty white scale.

Why do you subtract cyanuric acid (CYA) from Total Alkalinity in LSI?

Standard drop-test Total Alkalinity measures both carbonate alkalinity and cyanurate alkalinity. Because only carbonate alkalinity participates in calcium carbonate equilibrium, modern LSI standards (Orenda/Taylor) subtract roughly one-third of your CYA reading from Total Alkalinity.

How does water temperature affect pool LSI in winter vs. summer?

Cold water holds more dissolved calcium carbonate than warm water—a drop from 84°F to 48°F pushes LSI down by roughly -0.30 to -0.40. Allowing pH to sit slightly higher (7.7–7.8) in cold winter months prevents plaster etching.

What is the CYA-to-Free-Chlorine ratio for preventing pool algae?

Cyanuric acid buffers chlorine against sunlight UV, but it also slows chlorine’s killing power. Maintain Free Chlorine (FC) at a minimum of 7.5% of your CYA level (and a daily target near 11.5% of CYA). For example, at 40 ppm CYA, keep FC at 4.5–5 ppm.

Does salt (high TDS) change LSI in a saltwater pool?

Yes. Saltwater pools running at 3,000–3,500 ppm TDS have slightly higher ionic strength, shifting LSI down by about -0.14 compared to freshwater pools—which our calculator automatically adjusts for.

Is this pool LSI calculator free and private?

Yes—every calculation runs locally in your browser with instant updates.