Guide

THE TOOLBOX / MEDIA & HARDWARE DIAGNOSTICS

Double Click Test —
Mouse Switch Chatter & Polling Rate (Hz).

Catch failing mouse microswitches across Left, Right, Middle, and Side buttons with millisecond bounce logging, and measure your true 125–4000 Hz USB/wireless polling rate locally.

1. Mouse Double-Click Switch Chatter Test

Click normally 20–50 times inside the target pad using Left, Right, Middle, or Side buttons. Any unintended repeat faster than 80 ms flags a failing microswitch.

Left Click
0 clicks
Faults: 0
Right Click
0 clicks
Faults: 0
Middle / Wheel
0 clicks
Faults: 0
Side Back (M4)
0 clicks
Faults: 0
Side Forward (M5)
0 clicks
Faults: 0

2. Mouse Polling Rate (Hz) & Jitter Arena

Swirl your mouse smoothly inside the dark pad to measure true USB/wireless report rate via PointerEvent.getCoalescedEvents().

Ready to Measure
Move Mouse Here
Swirl rapidly in circles for 2 seconds to measure 125 / 500 / 1000 / 4000 Hz

MOUSE DIAGNOSTIC GUIDE

Diagnosing double-click switch chatter and verifying gaming polling rates.

1. Spotting Microswitch Chatter (<80 ms)

Click the target pad at a relaxed, steady rhythm. Healthy switches register clean single clicks (150–400 ms apart); oxidized mechanical contacts bounce within 15–70 ms and light up red as a confirmed fault.

2. Quick Fixes Before Replacing Your Mouse

Before buying a new mouse, check your mouse software for a Debounce Time slider (raising it from 2 ms to 8–12 ms often eliminates chatter), try a different USB port, or blow compressed air under the button housing to clear static buildup.

3. Polling Rate & Motion Latency

A standard office mouse polls at 125 Hz (8.0 ms interval), gaming mice run at 1000 Hz (1.0 ms), and esports wireless dongles reach 4000–8000 Hz (0.25–0.125 ms).

Mouse Polling Rate & Input Interval Reference

Polling RateReport IntervalTypical Hardware Tier
125 Hz8.00 msStandard office & Bluetooth mice
500 Hz2.00 msBattery-saving wireless gaming mode
1,000 Hz1.00 msStandard wired & 2.4 GHz gaming mice
2,000 – 4,000 Hz0.50 – 0.25 msHigh-refresh (240 Hz+) esports mice

Frequently Asked Questions

What causes a mouse to double-click when I only click once?

Worn or oxidized mechanical microswitches (like aging Omron leaf springs) bounce electrically when pressed or released, firing two contacts 10–70 milliseconds apart. Because a human finger rarely clicks twice faster than ~80 ms on purpose, intervals below 80 ms flag switch chatter.

How many clicks should I do in a double click test?

Perform 30 to 50 steady single clicks on each button (Left, Right, Middle, and Side M4/M5), mixing quick taps with slightly slower presses. Even 1 or 2 red chatter alerts under 80 ms confirms an intermittent double-clicking switch.

Can I test my right-click, scroll-wheel middle click, and side buttons too?

Yes. The click pad suppresses the browser context menu so you can test Left, Right, Middle/Scroll-Wheel, Side Back (M4), and Side Forward (M5) switches independently with separate fault counters.

How does the mouse polling rate (Hz) tester measure 1000 Hz or 4000 Hz?

Standard browser mousemove events are throttled to your monitor refresh rate (60–144 Hz). This tester reads PointerEvent.getCoalescedEvents() to unpack every high-frequency USB or wireless packet delivered between display frames.

What should I set the double-click fault threshold to?

80 ms is the ideal default for normal single-click testing. If you are intentionally jitter-clicking or butterfly-clicking for gaming, lower the threshold to 40–50 ms so only true hardware bounces are flagged.

Does this double click test run locally in my browser?

Yes. All millisecond click timings and coalesced pointer intervals are measured locally with high-resolution performance.now() timestamps.