Guide

HARDWARE DIAGNOSTICS · W3C GAMEPAD API

Gamepad & Controller Tester,
diagnose drift & circularity live.

Inspect PS5 DualSense, Xbox Series, Switch Pro, and PC controllers locally. Measure resting stick drift, 360° circularity RMSE on both sticks, analog trigger pressure, polling rate (Hz), and dual-motor rumble.

No physical controller detected (Interactive Mode)
Standard LayoutStandby0 / 17 active
Left Analog Stick (LS / L3)CENTERED
Axis X
0.000
Axis Y
0.000
Vector
0.0%
Circ. Err
0%
Right Analog Stick (RS / R3)CENTERED
Axis X
0.000
Axis Y
0.000
Vector
0.0%
Circ. Err
0%
B6 (L2 / LT) (Analog Trigger)0%
B7 (R2 / RT) (Analog Trigger)0%
Recommended Deadzone
5%
Threshold: 8%
Left Circularity RMSE
0%
360° sweep: 0%
Right Circularity RMSE
0%
360° sweep: 0%
Stick Angles
0° / 0°
L / R polar heading
17-Button Standard Mapping (Press physical buttons or click to toggle)B0–B16

Plug in a PS5 DualSense, Xbox, Switch Pro, or USB/Bluetooth gamepad and press any button to wake it.

DIAGNOSTIC GUIDE

How stick drift, circularity RMSE, and deadzones work.

1. Resting Stick-Drift Check

A healthy thumbstick returns near (0.000, 0.000) when released. If your resting vector consistently sits above 5%–8%, use the recommended deadzone readout to stop unwanted camera movement in-game.

2. 360° Circularity RMSE

Rotate each thumbstick smoothly around its outer rim until sector coverage reaches 100%. The tool computes root-mean-square error against the ideal unit circle (r = 1.00) for both Left and Right sticks independently.

3. Polling Rate & Analog Triggers

Monitor live input update cadence (Hz) and verify that L2/LT and R2/RT ramp smoothly from 0% to 100% without spikes or stuck values.

Frequently Asked Questions

How do I check my PS5 DualSense or Xbox controller for stick drift?

Connect your controller via USB or Bluetooth, press any button to wake the browser Gamepad API, and release both thumbsticks. If the resting vector exceeds your deadzone threshold (typically 5% to 8%), the potentiometer or sensor has stick drift.

What is a good analog stick circularity error score?

Circularity error measures the root-mean-square deviation between your thumbstick outer-gate trace and a true unit circle (r = 1.00). Calibrated Hall-effect and TMR sticks typically score under 6%–8%, while standard potentiometers average 7%–12%.

How do I test L2 / R2 analog triggers and dual-motor rumble?

Squeeze your left and right triggers slowly to verify smooth 0%–100% pressure ramps without dead spots. Click Test Dual-Motor Rumble in Chrome or Edge to send a 360ms haptic pulse via the browser vibrationActuator API.

Why does my controller not appear until I press a button?

For browser fingerprinting privacy, the W3C Gamepad API intentionally hides connected controllers until the user presses a button or moves an axis on that controller while the tab is focused.

Does this gamepad tester upload any hardware telemetry?

No. All axis coordinates, trigger values, polling rates, and button states are read locally inside your browser tab via navigator.getGamepads().