Guide

Home Safety • DIY & Roofing

Extension Ladder 4:1 Angle & Length Calculator

Enter your roofline or wall contact height to calculate the safe OSHA 4:1 base setback (75.5°), required 3-foot roof overhang, and exact extension ladder size to buy or rent.

Recommended Extension Ladder
24-Foot Ladder
Needs 19.5 ft extended (includes section overlap + 3 ft roof extension)
OSHA 4:1 Base Setback (75.5°)
4.0 ft
Place ladder feet 48" away from the wall
Tested Angle Check
76.0°
SAFE (Near 75.5° OSHA 4:1 target)

Extension Ladder Size Quick Chart (With 3-Foot Roof Overhang)

Roof / Gutter Height4:1 Base SetbackMin Extension Ladder Size
9–10 ft (1-Story)2.5 ft16 ft (max extended 13 ft)
13–14 ft3.5 ft20 ft (max extended 17 ft)
17–18 ft (2-Story)4.5 ft24 ft (max extended 21 ft)
21–22 ft5.5 ft28 ft (max extended 25 ft)

Related Home & DIY Safety Tools

Frequently Asked Questions

What is the OSHA 4-to-1 extension ladder angle rule?

For every 4 feet of vertical height to the upper support point (wall or gutter), place the base of the ladder 1 foot away from the wall. That creates an optimal 75.5° climbing angle that prevents both backward tipping and bottom slip-out.

Why is a 24-foot extension ladder only 21 feet long when fully extended?

Extension ladders consist of two overlapping sections. ANSI and OSHA safety standards require 3 feet of section overlap on ladders up to 32 feet (and 4 feet on 36–40 ft ladders), reducing maximum working length by 3–4 feet.

How far must an extension ladder extend past a roof edge?

When climbing onto a roof or upper landing, OSHA requires the ladder side rails to extend at least 3 feet (roughly 3 rungs) above the roofline so you have secure handholds when stepping on and off.

How can I quickly check a 75° ladder angle without a tape measure?

Stand upright with your toes touching the ladder's bottom feet and extend your arms straight out horizontally. If your palms rest comfortably on the rung in front of you, the angle is very close to 75°.