Guitar String Tension Calculator — Compare Light (.012) vs. Medium (.013), Scale Lengths & Alternate Tunings.
Calculate exact per-string and total neck tension in pounds or kilograms across acoustic and electric gauges, scale lengths, and alternate tunings—with instant truss-rod setup guidance.
Scale:
Set A Total Pull
148.9 lbs
Acoustic Light (.012–.053)
Set B Total Pull
172.3 lbs
Acoustic Medium (.013–.056)
Neck Pull Difference
+23.4 lbs
at 25.5" scale · STANDARD
String
Set A Gauge
Set B Gauge
Tension Comparison
Delta
#6 E2
23.0 lbs
25.7 lbs
+2.7 lbs
#5 A2
25.7 lbs
29.5 lbs
+3.8 lbs
#4 D3
26.6 lbs
31.8 lbs
+5.2 lbs
#3 G3
26.7 lbs
31.3 lbs
+4.6 lbs
#2 B3
23.4 lbs
26.4 lbs
+3.0 lbs
#1 E4
23.5 lbs
27.5 lbs
+4.1 lbs
Setup & Truss Rod Note: Set B adds 23.4 lbs of neck pull. Expect slightly more relief (up-bow); a 1/8–1/4 turn clockwise truss rod tweak may keep action low.
TYPICAL NECK PULL REFERENCE
Total String Tension by Gauge Set (25.5" Scale, Standard EADGBE).
String Set
Gauges
Approx. Total Pull
Best For
Acoustic Extra Light
.010 – .047
~125–135 lbs (59 kg)
Beginners, light fingerstyle, vintage tops
Acoustic Light
.012 – .053
~155–165 lbs (73 kg)
All-around strumming & fingerpicking
Acoustic Medium
.013 – .056
~180–190 lbs (84 kg)
Bluegrass flatpicking, heavy strumming, Eb tuning
Electric Super Light
.009 – .042
~85–95 lbs (41 kg)
Fast lead playing & wide bends
Electric Regular Light
.010 – .046
~102–110 lbs (48 kg)
Balanced rhythm & lead tone
1. Matching Tension When Downtuning
If you love the feel of .012 Lights in Standard tuning but want to play in Eb (half-step down) or DADGAD, stepping up to .013 Mediums (or a Light-Medium Bluegrass set) restores nearly identical finger feel without floppy bass strings.
What is the tension difference between Light (.012–.053) and Medium (.013–.056) acoustic strings?
On a standard 25.5" scale acoustic guitar in standard tuning (EADGBE), a Light (.012–.053) phosphor bronze set pulls roughly 155–165 lbs total, while a Medium (.013–.056) set pulls roughly 180–190 lbs—an increase of ~22–28 lbs across the neck and bridge. Mediums deliver louder projection and punchier bass, while Lights are easier on the fingertips and safer for vintage or small-body guitars.
How is guitar string tension calculated?
String tension follows the Mersenne-Taylor string physics formula: T = UW × (2 × L × f)² / 386.4, where UW is the string’s linear unit weight (lb/in), L is the scale length (in inches), and f is the pitch frequency (in Hz). Doubling frequency quadruples tension, and longer scale lengths increase tension proportionally to the square of the length.
How much tension do I lose when tuning down a half-step (Eb) or full-step (D)?
Tuning down a half-step (Eb standard) reduces string tension by roughly 11% across every string—which makes Medium (.013) strings feel almost identical to Light (.012) strings in standard tuning. Tuning down a full step (D standard) drops tension by roughly 21%.
Do I need a truss rod adjustment when switching from .012s to .013s?
Often yes. Adding 20+ lbs of total pull increases forward neck bow (relief) and raises string action slightly. Let the guitar settle for 24 hours, check relief at the 7th–8th fret, and apply a small 1/8 to 1/4 turn clockwise if needed—or have a luthier check the nut slots too.
Why does a 24.75" Gibson scale feel slinkier than a 25.5" Fender or Dreadnought scale?
Because tension scales with the square of scale length (L²). Using the exact same string gauge and tuning, a 24.75" scale guitar has about 6% less string tension than a 25.5" scale guitar—making bends noticeably easier.
Does this guitar string tension calculator work for electric guitars and alternate tunings?
Yes. Select Electric Super Light (.009–.042) or Regular Light (.010–.046) with Nickel-Plated Steel alloy, and switch between Standard, Eb, D Standard, Drop D, DADGAD, Open G, and Open D—or type any custom gauge per string.