Guide

THE TOOLBOX / AUDIO & MIXING

Delay Time Calculator —
BPM to Milliseconds (ms), Reverb Pre-Delay & LFO Hz.

Enter or tap your song's BPM to get instant straight, dotted, and triplet delay times in milliseconds, tempo-synced reverb pre-delay and decay settings, and LFO Hz—with one-click copy and audio preview.

Tempo Presets:
BPM · 1/4 = 500.0 ms

Tempo-Synced Reverb Settings

Tight Room / SnarePre 31.3 ms · Decay 0.50 s
Lead Vocal Plate / HallPre 62.5 ms · Decay 1.00 s
Wide Ballad / ArenaPre 125.0 ms · Decay 2.00 s

Delay Time Chart (Click Any Millisecond Value to Copy · ▶ to Audition)

Note ValueStraight (ms)Dotted (ms)Triplet (ms)LFO (Hz)Listen
1/1 (Whole / 1 Bar)0.50 Hz
1/2 (Half Note)1.00 Hz
1/4 (Quarter Note)2.00 Hz
1/8 (Eighth Note)4.00 Hz
1/16 (Sixteenth Note)8.00 Hz
1/32 (Thirty-Second)16.00 Hz
1/64 (Pre-Delay)32.00 Hz
1/128 (Tight Slap)64.00 Hz

MIXING & DELAY REFERENCE

Essential BPM-to-ms Formulas & Classic Studio Delay Tricks.

Note SubdivisionFormula (ms)At 120 BPMBest Studio Use
1/4 Note60,000 ÷ BPM500.0 msLead vocal throws & spacious guitar echoes
1/8 Dotted(60,000 ÷ BPM) × 0.75375.0 msSyncopated rhythmic guitar & synth arps
1/8 Note30,000 ÷ BPM250.0 msTight rhythmic slap & hip-hop ad-libs
1/32 Note7,500 ÷ BPM62.5 msVocal doubling & hall reverb pre-delay

1. Keep Vocals Clear with Pre-Delay

Set your vocal reverb pre-delay to a 1/64 or 1/32 note so the dry consonants cut through before the reverb blooms in time with the groove.

2. Compressor Release in Sync

Dialing bus compressor release time to a 1/16 or 1/8 note makes the mix pump rhythmically with the kick and snare instead of fighting the tempo.

Frequently Asked Questions

What is the formula to convert BPM to delay milliseconds (ms)?

Divide 60,000 by your song’s BPM to find the exact length of a quarter note in milliseconds (60,000 ÷ 120 BPM = 500 ms). Divide by 2 for an eighth note (250 ms), multiply by 1.5 for a dotted note, or multiply by 2/3 for a triplet.

How do I calculate dotted 1/8 note delay time?

A dotted eighth note equals 1.5 × an eighth note (or 0.75 × a quarter note): (60,000 ÷ BPM) × 0.75. At 120 BPM, dotted 1/8 delay is 375 ms—the classic U2 / modern worship guitar delay groove.

What reverb pre-delay time should I use for vocals?

A 1/64 or 1/32 note pre-delay (roughly 15–40 ms at pop tempos) separates the dry vocal transient from the reverb tail so the singer stays upfront while the reverb still breathes in time with the track.

How do I convert delay milliseconds to LFO Hz?

Divide 1,000 by the millisecond time (Hz = 1000 ÷ ms). At 120 BPM, a quarter-note LFO runs at 2.00 Hz and an eighth-note LFO runs at 4.00 Hz.

Why should I set reverb decay time to match the BPM?

Timing your reverb decay (RT60) to a 1/4, 1/2, or 1-bar duration ensures the reverb tail clears cleanly right before the next chord change or snare hit, preventing muddy mixes.

Does the Tap Tempo button work on mobile and desktop?

Yes. Tap the button rhythmically in time with any track to average your last 6 taps and immediately update every delay, reverb, and LFO value.