Guide

THE TOOLBOX / AUTOMOTIVE & DRIVETRAIN

Gear Ratio Calculator —
Tire Size, Highway RPM & Crawl Ratio.

Decode P-metric or 35x12.50 tire sizes, compute exact highway cruise RPM and redline speed in every gear, check speedometer error, and calculate 4WD low-range crawl ratios.

Cruise RPM @ 70 MPH
1,975
Top gear (0.67:1) · 1:1 = 2948 RPM
Tire Diameter
32.7"
831 mm · Sidewall 7.9"
Speedo @ 60 MPH
62.1 mph
+3.5% vs stock
4LO Crawl Ratio
52.5:1
Eff. axle vs stock: 3.96

Drivetrain & Tire Setup

4.10:1

Speed-in-Gear Breakdown (Jeep / Ram 850RE 8-Speed Auto)

GearTrans RatioRPM @ 70 MPHMax MPH @ 6200 RPMBar
14.71:1Over Redline31.3 mph
23.14:1Over Redline46.9 mph
32.11:1Over Redline69.8 mph
41.67:14,924 RPM88.1 mph
51.29:13,803 RPM114.1 mph
6 (1:1)1.00:12,948 RPM147.2 mph
7 (OD)0.84:12,476 RPM175.2 mph
8 (OD)0.67:11,975 RPM219.7 mph

DRIVETRAIN & RE-GEARING GUIDE

RPM formula, overdrive math, and tire-to-axle ratio matching.

1. The Classic 336 RPM Formula

RPM = (MPH × Axle Ratio × Trans Ratio × 336) ÷ Tire Diameter (in). Rearrange to solve for top speed in any gear: MPH = (Redline RPM × Tire Dia) ÷ (Axle × Trans × 336).

2. Decoding P-Metric Tire Sizes

For a 285/70R17 tire: sidewall height is 285 mm × 0.70 ÷ 25.4 = 7.85". Overall diameter is 17 + (2 × 7.85) = 32.7".

3. Restoring Factory Feel After a Lift

Compare your Effective Axle Ratio against factory gearing. Moving from 31.6" to 35" tires on 3.73 gears drops effective gearing to 3.37—stepping up to 4.10 or 4.56 restores crisp highway passing power.

Frequently Asked Questions

What is the formula for highway cruise RPM from gear ratio and tire size?

Engine RPM = (MPH × Axle Gear Ratio × Transmission Gear Ratio × 336) ÷ Tire Diameter in Inches. The constant 336 converts miles per hour and tire diameter in inches into revolutions per minute.

How do larger tires affect my effective gear ratio and speedometer?

Taller tires travel farther per axle revolution, which lowers your effective gear ratio (making acceleration feel more sluggish) and causes your speedometer to read slower than your true GPS speed.

What axle ratio should I re-gear to for 35-inch tires?

For most trucks and Jeeps moving from 31"–32" stock tires to 35" tires, re-gearing to 4.56:1 (for daily highway driving) or 4.88:1 (for towing, mountain passes, or heavy off-road armor) restores factory shift points and cruise RPM.

How is 4WD Crawl Ratio calculated?

Crawl Ratio = 1st Gear Transmission Ratio × Axle Ratio × Transfer Case Low-Range Ratio (typically 2.72:1 or 4.0:1). Higher crawl ratios give slower, higher-torque wheel control on steep rock trails.