Guide

THE TOOLBOX / HOME & HVAC

Dehumidifier Size Calculator —
2019 DOE Pint Capacity, Legacy Equivalent & Electricity Cost.

Find the right dehumidifier pint rating for your basement, crawlspace, garage, or bedroom—factoring in dampness severity, ceiling height, low-temperature frost risk, and monthly power cost.

Preset:
1,200 sq ft
Moisture / Dampness Condition
62°F
Recommended Dehumidifier CapacityTarget 45–50% RH
2019 DOE Standard Rating
50-Pint / Day
Calculated need: 48 pints/day · Pre-2019 legacy label equivalent: ~70 pints
Power Draw
560W
6.7 kWh/day
Est. Monthly Cost
$32/mo
12h/day duty cycle
Bucket Empty
~10h
Drain pump ideal
Smart Buying Checklist for Your Space
  • Room temperature (62°F) is ideal for an Energy Star refrigerant dehumidifier.
  • High daily water volume: Pick a model with a built-in condensate pump or gravity garden-hose port to a floor drain/sump pit.
  • Look for ENERGY STAR Most Efficient (≥ 1.85 L/kWh) to cut summer electricity bills by 15%–25%.

DOE SIZING MATRIX

2019 DOE Dehumidifier Pint Capacity Chart by Room Size.

Area (sq ft)Moderately DampVery DampWet / Musty
Up to 500 sq ft22 pt (DOE)22–30 pt (DOE)30–35 pt (DOE)
500 – 1,000 sq ft22–30 pt (DOE)30–35 pt (DOE)50 pt (DOE)
1,000 – 1,500 sq ft30–35 pt (DOE)50 pt (DOE)50–70 pt (DOE)
1,500 – 2,500+ sq ft50 pt (DOE)50–70 pt (DOE)70–95+ pt / Crawlspace

2. DOE vs. Pre-2019 Pint Labels

Always compare current 2019 DOE ratings (measured at 65°F/60% RH) rather than older 80°F ratings: a 22 pt DOE ≈ 30 pt legacy, 35 pt DOE ≈ 50 pt legacy, and 50 pt DOE ≈ 70 pt legacy.

Frequently Asked Questions

What size dehumidifier do I need for a 1,000 to 1,500 sq ft basement?

Under the 2019 DOE testing standard, a moderately to very damp 1,000–1,500 sq ft basement typically needs a 35-pint to 50-pint (DOE) dehumidifier. If the basement smells strongly musty, has water seepage, or stays below 60°F, step up to a 50-pint unit with a built-in condensate pump and auto-defrost.

Why did 70-pint dehumidifiers become 50-pint dehumidifiers?

In June 2019, the U.S. Department of Energy updated dehumidifier test conditions from 80°F/60% RH to a cooler, more realistic basement condition of 65°F/60% RH. Because cooler air holds less moisture, an older "70-pint" machine now carries a 50-pint DOE rating—even though it is the exact same physical capacity.

What humidity level should I set my basement dehumidifier to?

Set your humidistat between 45% and 50% relative humidity (RH). Keeping RH below 55% stops mold spores, dust mites, and musty odors without forcing the compressor to run nonstop.

Can I oversize a dehumidifier, or is bigger better?

Slightly oversizing a dehumidifier (e.g., choosing a 50-pint unit instead of a 30-pint unit) is usually better: it reaches your target humidity faster, cycles off more often, and often uses less electricity per pint removed than a small unit running 24/7.

Do I need a dehumidifier with a built-in pump for a basement or crawlspace?

If you have a floor drain or sump pit below the unit, a cheap gravity hose works fine. If you need to pump water upward into a utility sink or out a basement window, a built-in condensate pump saves you from emptying a heavy 15-pint bucket twice a day.

How much electricity does a 50-pint dehumidifier cost to run?

A modern Energy Star 50-pint dehumidifier draws roughly 500–600 watts while the compressor is active. At $0.16/kWh and a 12-hour daily duty cycle, that works out to about $1.00 per day or $30 per month during humid summer months.