Guide

THE TOOLBOX / WOODWORKING & BACKYARD GAMES

Cornhole Board Dimensions Guide —
Regulation 24×48" Blueprint, Hole Placement & 2-Board Cut List.

Build tournament-spec DIY cornhole boards without second-guessing a single measurement—compare 24×48" ACA/ACL regulation vs. 24×36" tailgate specs, 9" hole center, 10.2° deck angle, and 27 ft pitch distance.

Scaled Woodworking Blueprint (24" × 48")
9"12"24" WIDE48" LONGØ 6" HOLE12"3.5"SLOPE: 10.0°PITCH: 27 FT FRONT-TO-FRONT
Deck Size
24"×48"
3/4" Baltic Birch
Hole Center
9" / 12"
6" diameter hole
Pitch Distance
27 ft
Front to front edge
2-Board Lumber & Hardware Cut List
  • Plywood Tops: One 4×8 ft sheet of 3/4" Baltic Birch makes 2 boards (zero waste)
  • Frame & Legs: Four 2×4×8 ft boards (4× 48" sides, 4× 21" ends, 4× ~11.5" folding legs)
  • Hardware: Four 3/8" × 3.5" carriage bolts + wingnuts + washers, 2.5" pocket screws, wood glue
  • Regulation Bags: 6" × 6" square · 16 oz (1 lb) filled with resin pellets or whole corn

REGULATION VS. TAILGATE SPECS

Official Cornhole Board & Court Dimensions Comparison.

SpecificationACA / ACL RegulationTailgate / Compact
Deck Surface24" W × 48" L24" W × 36" L
Hole Diameter & Center6" dia · 9" from top · 12" center6" dia · 9" from top · 12" center
Front / Back Height3"–4" front · 12" back (~10.2°)3"–4" front · 12" back (~13.3°)
Pitch Distance27 ft (front-to-front)21 ft (or 15 ft youth)

2. Clear-Coat Slickness Tip

Finish painted tops with 3–4 thin coats of water-based polycrylic (sanding lightly with 320-grit between coats) so bags glide cleanly without sticking or sliding off.

Frequently Asked Questions

What are the official ACA / ACL regulation cornhole board dimensions?

Official regulation cornhole boards measure exactly 24 inches wide by 48 inches long, with a 6-inch diameter hole centered 9 inches down from the top edge and 12 inches from each side. The front edge stands 3 to 4 inches off the ground and the back edge stands exactly 12 inches high.

How far apart are regulation cornhole boards placed?

Regulation adult pitch distance is 27 feet measured from the front edge of one board to the front edge of the opposite board (meaning the two holes are 33 feet apart). Tailgate and youth setups typically use 21 feet (or 15 feet for young kids).

What thickness plywood is best for DIY cornhole boards?

Use 3/4-inch cabinet-grade Baltic Birch plywood (or 5/8" minimum with a center cross-brace). Thinner 1/2" plywood bounces bags unpredictably like a trampoline unless heavily braced underneath.

What angle do you cut cornhole legs so they sit flat on the ground?

With a 12-inch back height and 3.5-inch front height on a 48-inch deck, the board slopes at ~10.2° (roughly a 10° miter cut on the bottom of each 2×4 folding leg so the foot sits flush on the lawn).

What are official cornhole bag weight and size specs?

Regulation ACL/ACA bags are 6" × 6" squares weighing 16 ounces (1 lb) each, filled with weatherproof plastic resin pellets (pro bags) or whole feed corn.

Can I copy the 2-board lumber cut list for the hardware store?

Yes—click "Copy Cut List" above to grab the exact plywood, 2×4 frame, and bolt list.