Guide

Cycling • Bike Fit & Geometry

Bike Stem, Stack & Reach Geometry Comparator

Compare two bike setups side by side to see exact millimeter shifts in handlebar height (stack) and horizontal extension (reach) before buying a new stem or frame.

Setup A (Current Bike / Stem)
Setup B (New Bike / Stem)
Handlebar Reach Change (B vs. A)
+13.9 mm
Longer / more stretched
Handlebar Stack Change (B vs. A)
-15.2 mm
Lower / more aerodynamic
Total Bar Clamp Coordinates
Setup A: 480.3 mm R × 593.2 mm S
Setup B: 494.3 mm R × 578.0 mm S

Quick Cockpit Fit Rules of Thumb

Related Cycling & Mobility Calculators

Frequently Asked Questions

How much does flipping a 100mm ±6° stem change handlebar height and reach?

Flipping a 100mm stem from −6° to +6° raises the handlebar clamp by roughly 20 mm while shortening horizontal reach by about 6 mm (on a typical 73° head tube angle).

Why does adding steerer spacers also reduce bike reach?

Because the fork steerer tube is angled back toward the rider (usually 71°–73° on road and gravel bikes), every 10 mm of headset spacers raises the stem by ~9.5 mm and brings it ~3 mm closer to the saddle.

How do I replicate my current bike fit on a new frame?

Enter your current frame's stack, reach, head tube angle, spacer stack, and stem specs in Setup A, then enter the new frame's geometry in Setup B and adjust spacers and stem length/angle until both deltas are close to 0 mm.

What does frame stack and reach measure?

Stack is the vertical distance and Reach is the horizontal distance from the center of the bottom bracket to the top-center of the head tube—providing a frame-size-independent way to compare bike fit.