1. Related Cycling Tools
Dial in your entire bike build with our Bike Saddle Height Fit Calculator, Bicycle Spoke Length Calculator, Chain & Sprocket Gear Ratio Calculator, and E-Bike Battery Range Calculator.
THE TOOLBOX / CYCLING & MECHANICS
Size a new 1×, 2×, or 3× bicycle chain accurately before breaking a single pin—calculating exact even link count, full-suspension clearance, and rear derailleur cage capacity.
Chain Purchase Check: Standard retail chains come in 114–116 links (and 126 links for 12-speed Eagle/Shimano MTB). A standard 116-link chain fits—remove 6 links (counting the quick-link as 1 outer link).
Formula: L = 2C + (F + R)/4 + 1 rounded up to an even number of 1/2" links.
DERAILLEUR CAGE GUIDE
| Cage Type | Typical Capacity | Common Drivetrain |
|---|---|---|
| Short Cage (SS) | ≤ 29T – 33T | Road 2× with tight 11-25T or 11-28T cassette |
| Medium Cage (GS) | 34T – 39T | Compact 50/34 road & gravel with 11-34T cassette |
| Long Cage (SGS) | 40T – 47T+ | 1×12 MTB (10-52T) or touring 3× drivetrains |
Dial in your entire bike build with our Bike Saddle Height Fit Calculator, Bicycle Spoke Length Calculator, Chain & Sprocket Gear Ratio Calculator, and E-Bike Battery Range Calculator.
After calculating, always test-wrap the chain around the largest chainring and largest rear cog (bypassing the derailleur) plus 2 full links to double-check.
Use the standard mechanical formula: Length (in inches) = (2 × Chainstay in inches) + (Largest Chainring ÷ 4) + (Largest Cassette Cog ÷ 4) + 1. Multiply by 2 to get half-inch links, round up to an even number, and add 2 links for full-suspension mountain bikes.
Yes! A quick-link / PowerLock replaces one outer link (0.5 inches), so size the remaining chain to (Target Links − 1) ending with two inner plates, then join them with the quick-link.
Total Capacity = (Largest Chainring − Smallest Chainring) + (Largest Rear Cog − Smallest Rear Cog). For a 1× drivetrain, front difference is 0, so a 10-50T cassette requires 40T of capacity.
As rear suspension compresses through its travel, the distance between the bottom bracket and rear axle often lengthens ("chain growth"). Adding 2 links prevents ripping off the rear derailleur on big hits in the easiest climbing gear.
Most 9/10/11-speed road chains ship with 114 or 116 links, while modern 12-speed MTB and gravel chains ship with 126 links to accommodate 50T–52T cassettes.
Yes—every link count and derailleur capacity calculation runs locally in your browser.