1. Related Home Remodeling Tools
Plan the rest of your bathroom remodel with our Bathroom Fan CFM Calculator, Water Heater Size Calculator, Tile & Room Square Footage Calculator, and Unit Converter (Inches ↔ cm).
THE TOOLBOX / HOME & INTERIOR DESIGN
Get contractor-ready mirror dimensions and electrical rough-in heights for any single or double bathroom vanity—complete with a scaled elevation blueprint, faucet clearance, and side sconce spacing.
A 22" wide mirror spans 61% of your 36" vanity—staying inset from the cabinet edges for balanced proportions. Bottom edge sits 5" above your faucet spout to prevent water spots.
VANITY-TO-MIRROR SIZING CHART
| Vanity Width | Single Mirror (Over-Bar) | Single Mirror (w/ Side Sconces) | Double Mirrors (2 Sinks) |
|---|---|---|---|
| 24" Powder Room | 18" – 22" W | 16" – 18" W (compact) | — |
| 30" Small Bath | 24" – 28" W | 20" – 22" W | — |
| 36" Guest Bath | 28" – 32" W | 22" – 26" W | — |
| 48" Primary Single | 36" – 44" W | 32" – 36" W | — |
| 60" Double Vanity | 52" – 56" W | 46" – 50" W | 2× (20" – 24" W) |
| 72" Double Vanity | 62" – 68" W | 56" – 60" W | 2× (24" – 28" W) |
Plan the rest of your bathroom remodel with our Bathroom Fan CFM Calculator, Water Heater Size Calculator, Tile & Room Square Footage Calculator, and Unit Converter (Inches ↔ cm).
Always confirm your chosen sconce backplate height before drywall closes. Center the junction box at 65"–68" from the finished floor so the glowing shade sits directly at eye level.
Interior designers generally size a bathroom mirror to 70%–85% of the vanity width (typically 2 to 4 inches narrower than the vanity on each side). A mirror should never extend past the edges of the vanity cabinet unless it is a custom wall-to-wall sheet mirror.
Hang the bottom edge of a bathroom mirror 4 to 6 inches above the top of the faucet spout (or about 5–10 inches above the countertop). This keeps the glass safe from daily splash spots while centering reflection height for both shorter and taller household members.
Mount side wall sconces so the center of the bulb or fixture sits 65 to 68 inches above the finished floor (roughly eye level) and 3 to 4 inches away from the left and right edges of the mirror. Side sconces cast far more even, shadow-free light on your face than overhead fixtures alone.
For a 60-inch double vanity, use either two 20"–24" mirrors (centered over each sink) or one wide 52"–56" horizontal mirror. For a 72-inch double vanity, pair two 24"–28" mirrors (allowing room for three vertical sconces) or one 62"–68" wide mirror.
Install the electrical junction box for an over-mirror light bar 75 to 80 inches above the finished floor—leaving 3 to 4 inches of breathing room above the top frame of the mirror and at least 6 inches below the ceiling.
Yes. Round mirrors soften tile-heavy bathrooms and work best when sized to 65%–75% of the vanity width (for example, a 24"–28" round mirror over a 36" vanity). Just verify the top of the circle sits at least 4 inches above the tallest user’s height.