Guide

Life

Archway Layout String Calculator

Find exact two-nail focus points, string length, segmental compass radius, and 1/16-inch plot offsets to lay out flawless elliptical or circular archways on plywood and drywall.

Common Openings:

Opening Dimensions

Nails From Centerline (F1, F2)
20.78" (20 13/16")
Or 3 3/16" inward from each jamb
String Length (Nail-to-Nail)
48.00" (48")
Closed loop around both nails: 89 9/16"

Live Layout Blueprint (Two-Nail String Method)

48" W × 12" H
Nail F1Nail F2Pencil Peak (H = 12")Opening Width W = 48"

9-Point Curve Offset Table (Alternative to String)

Plot these dots on plywood or drywall by measuring across from the left jamb and straight up from the springline, then connect with a flexible batten strip.

StationDistance From Left JambDistance From CenterlineMeasure UP From Springline
Left Jamb0"24"0.00" (0")
Pt 16"18"7.94" (7 15/16")
Pt 212"12"10.39" (10 3/8")
Pt 318"6"11.62" (11 5/8")
Center Peak24"0"12.00" (12")
Pt 530"6"11.62" (11 5/8")
Pt 636"12"10.39" (10 3/8")
Pt 742"18"7.94" (7 15/16")
Right Jamb48"24"0.00" (0")

Elliptical String Formula vs. Segmental Radius Formula

Whether you are framing a cased living-room opening, adding a mudroom nook, or building a garden arbor, getting the geometry right on the first sheet of plywood saves wasted cuts. This archway layout string calculator solves both classic carpentry layouts in fractional inches (to the nearest 1/16") and centimeters.

Arch TypeCore FormulaBest Use Case
Elliptical (2-Nail String)c = √((W/2)² − H²), String = WWide interior openings where vertical jambs blend smoothly into the curve.
Segmental (1-Pivot Arc)R = H/2 + W²/(8H)Gentle eyebrow arches, masonry lintels, built-in bookshelves, and cabinetry.
Half-Round (Semicircular)H = W/2, R = W/2 (Pivot at center)Narrow hallways, pantry doors, and Mediterranean-style niches.

Frequently Asked Questions

How does the two-nail string method draw a true elliptical arch?

Every point on an ellipse has the same combined distance to two focal points (F1 and F2). By driving two finish nails along the springline at distance c = √((W/2)² − H²) left and right of center and tying a non-stretch string of length W between them, a pencil pulled taut sweeps a mathematically perfect elliptical arch.

What kind of string should I use so my arch stays accurate?

Use braided nylon mason line, thin picture-hanging wire, or non-stretch polyester twine. Avoid cotton string or paracord, which stretch under pencil tension and cause the curve to bulge past your jamb marks.

What is the difference between an elliptical arch and a segmental (circular) arch?

An elliptical arch curves steeply up from both vertical jambs for a soft, tangent transition—ideal for interior hallways and drywall openings. A segmental arch is a slice of a single circle, meeting the jambs at a crisp angle; it is classic for brick lintels, cabinetry, and shallow eyebrows.

How do I lay out a shallow segmental arch when the radius is huge?

When a shallow arch produces a 6-foot or 10-foot radius that will not fit inside the room, skip the long trammel stick and use our 9-Point Curve Offset Table. Plot the dots directly on your plywood template, tack finish nails at each dot, and bend a thin wood batten strip against them to trace the smooth curve.

Should I enter the rough framing width or the finished drywall opening?

Enter the finished opening width and rise when marking the face plywood or drywall cutout. If you are cutting framing ribs that sit behind 1/2-inch flexible drywall (or two layers of 1/4-inch drywall), add 1 inch to the width and 1/2 inch to the rise so the finished arch lands on target.

Why does the calculator clamp the rise at half the opening width?

When the arch rise equals exactly half the width (H = W/2), the two focal nails merge at the centerline and the arch becomes a true semicircular (half-round) arch. If you want a taller opening, simply lower the springline where the curve begins.