Home Decor • Window Treatments
Window Blind Mount & Curtain Rod Size Calculator
Plug in your top, middle, and bottom window measurements to get exact inside- or outside-mount blind order dimensions plus designer-proportioned curtain rod specs.
Designer Curtain & Blind Sizing Rules
- Inside Mount Blinds: Always use the narrowest of 3 widths (rounded down to 1/8") and the tallest height; let the factory make the fit deduction.
- Outside Mount Blinds: Add 2" on every side (+4" width, +4" height) to eliminate side light gaps.
- High & Wide Curtains: Hang rods 4"–6" above trim and 4"–6" past each edge; choose 84", 96", or 108" panels that just kiss the floor.
Related Home Decor Calculators
Frequently Asked Questions
Should I take my own width deduction when ordering inside-mount blinds?
No! Measure the inside width at the top, middle, and bottom, then report the narrowest measurement rounded down to the nearest 1/8 inch. Blind manufacturers automatically deduct 3/8" to 1/2" so the headrail fits cleanly without scraping.
How much wider should a curtain rod be than the window?
Extend your curtain rod 4 to 6 inches past each side of the window casing (8 to 12 inches wider overall). That allows open curtain panels to stack beside the glass so maximum natural daylight enters the room.
How high above the window frame should I hang a curtain rod?
Mount the rod 4 to 6 inches above the window trim (or halfway to the ceiling if you have standard 8-foot ceilings) to make windows look taller and ceilings feel higher.
How much window frame depth is needed for inside-mount blinds?
Most 2-inch faux-wood blinds require at least 2.0" to 2.5" of flat interior frame depth for a flush mount. If your casing is shallower than 1.5", choose an outside mount instead.