1. Save Space With Switchback Landings
When a 36" rise requires 36 feet of run, placing a 60" × 60" U-turn or L-turn landing at the midpoint cuts linear yard space in half while staying 100% ADA compliant.
THE TOOLBOX / CONSTRUCTION & ACCESSIBILITY
Enter your vertical rise and target slope ratio (1:12 ADA standard through 1:4 shed ramps) to calculate horizontal run, sloped board length, degree angle, required 60-inch rest landings, and handrail rules.
Meets ADA 2010 §405 running slope (≤ 1:12) and clear width (≥ 36").
ADA 1:12 RAMP LENGTH REFERENCE
| Vertical Rise | 1:12 Horizontal Run | Intermediate 60" Landings | Handrails Required |
|---|---|---|---|
| 6" (15 cm) | 6.0 ft (1.83 m) | 0 | No (≤ 6" exemption) |
| 18" (46 cm) | 18.0 ft (5.49 m) | 0 | Yes (both sides) |
| 30" (76 cm) | 30.0 ft (9.14 m) | 0 (max single run) | Yes (both sides) |
| 42" (107 cm) | 42.0 ft + 5 ft landing | 1 (switchback or straight) | Yes (both sides) |
When a 36" rise requires 36 feet of run, placing a 60" × 60" U-turn or L-turn landing at the midpoint cuts linear yard space in half while staying 100% ADA compliant.
Keep side-to-side cross-slope under 1:48 (2%) for drainage and finish wood or concrete ramps with slip-resistant grip strips or textured exterior paint.
Size deck or porch framing in our Rafter Span Calculator, estimate concrete stoops in the Concrete Steps Calculator, or plan patio pavers in our Paver Patio Calculator.
Under ADA 2010 Standards (§405.2), the maximum running slope for a wheelchair ramp is 1:12 (8.33% grade or 4.76°)—meaning 12 inches (1 foot) of horizontal ramp run for every 1 inch of vertical rise.
At a 1:12 slope, a 24-inch vertical rise requires 24 feet of horizontal ramp run (plus level 60" × 60" top and bottom landings).
ADA §405.6 limits any single ramp run to a maximum rise of 30 inches (30 feet at 1:12). If your total rise exceeds 30 inches, you must add a level 60-inch intermediate rest landing between runs.
Handrails are required on both sides of any ramp run with a vertical rise greater than 6 inches, mounted 34" to 38" above the ramp surface with 12-inch horizontal extensions at top and bottom.
For riding mowers, snowblowers, and wheelbarrows (not wheelchairs), a 1:4 to 1:5 slope (11°–14°) is common and prevents mower decks from scraping at the shed threshold.
The minimum clear width between handrails is 36 inches (915 mm), though 42" to 48" is often preferred for two-way comfort and easy framing.