Guide

THE TOOLBOX / AUTOMOTIVE FITMENT

Tire Size Comparison &
Speedometer Error Calculator

Compare stock vs. upgrade tire sizes side-by-side with scaled profile visuals, ±3% diameter safety checks, ground clearance shifts, revolutions per mile, and exact mph / km/h speedometer readings.

Stock Tire (OEM)
New Tire (Compare)

Diameter Difference: +3.71% (+1.06")

Exceeds the ±3% guideline — verify fender/strut clearance, speedometer recalibration, and AWD transfer case tolerance.

Ground Clearance: +0.53"
Scaled Side-Profile Visual
17"225/65R17 (28.5")18"245/60R18 (29.6")
Speedometer Reading vs. Actual Speed
Speedo ReadsActual SpeedError
20 mph20.7 mph+0.7 mph
30 mph31.1 mph+1.1 mph
40 mph41.5 mph+1.5 mph
50 mph51.9 mph+1.9 mph
60 mph62.2 mph+2.2 mph
70 mph72.6 mph+2.6 mph
80 mph83.0 mph+3.0 mph
Dimension-by-Dimension Comparison
Measurement225/65R17245/60R18Difference
Overall Diameter28.52"29.57"+3.71%
Section Width8.86"9.65"+0.79"
Sidewall Height5.76"5.79"+0.03"
Circumference89.6"92.9"+3.71%
Revs / Mile707682-25
Ground ClearanceBaseline+0.53"Higher

FITMENT ENGINEERING GUIDE

Tire diameter formulas, speedometer math & safety checks

1. Overall Tire Diameter Formula

Sidewall (mm) = Width (mm) × (Aspect Ratio ÷ 100). Then Overall Diameter (in) = Rim Diameter (in) + (2 × Sidewall mm ÷ 25.4).

2. Worked Example: 225/65R17 vs. 245/60R18

A 225/65R17 has a 146.3 mm (5.76") sidewall and 28.52" diameter. Upgrading to 245/60R18 gives a 147.0 mm (5.79") sidewall and 29.57" diameter (+3.71%), raising ground clearance by +0.53" and making 60 mph indicated equal 62.2 mph actual.

3. AWD & Staggered Fitment Warning

On all-wheel-drive (AWD) vehicles, always keep all four tires within 1%–2% rolling circumference of each other (and replace mismatched worn tires in sets) to avoid overheating center differentials.

Frequently Asked Questions

What is the 3% tire size rule?

Automotive fitment engineers recommend keeping a replacement tire’s overall diameter within ±3% of the original factory (OEM) tire diameter. Staying within ±3% prevents inaccurate speedometer readings, protects ABS and stability control calibration, and reduces premature brake or transmission wear.

How do you read a metric tire size like 225/65R17?

225 is the section width in millimeters (225 mm), 65 is the aspect ratio (sidewall height is 65% of the width = 146.25 mm), R indicates radial construction, and 17 is the wheel rim diameter in inches.

How does a larger tire affect my speedometer?

A taller tire travels farther per wheel revolution, so your actual road speed is higher than what the speedometer displays. For example, if your new tire is 4% taller and your dash reads 60 mph, you are actually driving 62.4 mph.

Can I put wider tires on my existing rims?

Usually you can go 10 mm to 20 mm wider (for example, 225 to 235 or 245) if your wheel rim width falls within the tire manufacturer’s approved rim-width range and you have sufficient strut and fender clearance.

What is Plus-Sizing (Plus 1 or Plus 2) wheels?

Plus-sizing increases wheel rim diameter by 1 or 2 inches while lowering the tire aspect ratio (sidewall profile) so the overall tire diameter stays nearly identical—for example, moving from 225/65R17 (28.5") to 245/60R18 (29.6" or 245/55R18 at 28.6").

Why do winter tire setups often "minus-size" to smaller rims?

Dropping down 1–2 inches in rim diameter with a narrower tread and taller sidewall (keeping total diameter within ±3%) improves snow traction, cushions potholes, and lowers winter tire replacement cost.