Guide

THE TOOLBOX / TEXTILES & CRAFTS

Tie-Dye Soda Ash Calculator —
Presoak Ratio, Procion MX Dye & Bottle Planner.

Calculate exact soda ash presoak buckets, Procion MX fiber-reactive dye teaspoons, urea, and squeeze bottles for 1 shirt or a 50-shirt tie-dye party.

Soda Ash Presoak
2 cups
440 g in 2 gal warm water
Dye Per 8 oz Bottle
4 tsp
~12 g/bottle · 72 g total
Squeeze Bottles
6×
8 oz bottles across 4 colors
Urea & Batch Cure
1 tbsp/btl
Batch 24 hrs @ 70°F+ before rinsing

PROCION MX MIXING CHART

Standard Fiber-Reactive Dye Strength per 8 oz Squeeze Bottle.

Color IntensityDye / 8 oz WaterUrea RecommendedExamples
Pastel / Tint1 tsp (~3 g)OptionalBaby blue, pale pink, lemon
Standard Bright2 tsp (~6 g)1 tbspFuchsia, bright yellow, lime
Deep / Double-Strength6 – 8 tsp (~20 g)1 – 2 tbspRaven Black, Scarlet, Turquoise

2. Wear Gloves & Dust Mask With Powder

Soda ash is alkaline and dries out skin, and fine Procion MX dye dust should not be inhaled—mix dry powders wearing a dust mask and nitrile gloves.

Frequently Asked Questions

What is the soda ash to water ratio for tie-dye?

The standard fiber-reactive tie-dye presoak ratio is 1 cup (~220 grams) of soda ash (sodium carbonate) dissolved in 1 gallon of warm water. Soak pre-washed 100% cotton shirts for 15–20 minutes, then wring until damp before applying dye.

How many shirts can 1 gallon of soda ash solution soak?

One gallon of soda ash presoak comfortably saturates 6 to 8 adult cotton T-shirts (~3 lbs dry weight). You can save and reuse leftover soda ash solution in a sealed bucket for months.

How much Procion MX dye powder goes into an 8 oz squeeze bottle?

Use 2 teaspoons for standard bright colors, 3–4 teaspoons for vibrant jewel tones, and 6–8 teaspoons (with 1 tbsp urea) for deep blacks, reds, and turquoises that carry an asterisk (*) on Procion MX jars.

Can I substitute baking soda for soda ash in tie-dye?

Raw baking soda (sodium bicarbonate) is too weak (pH ~8.3). However, you can convert baking soda into true soda ash (sodium carbonate, pH ~11) by baking it on a rimmed sheet pan at 400°F for 45–60 minutes.

Why did my tie-dye shirts fade after the first wash?

Fading usually happens because the fabric was a polyester blend (fiber-reactive dyes only bond permanently to natural cellulose like 100% cotton, rayon, linen, or hemp), the shirt wasn’t soaked in soda ash, or it cured in a cold room for less than 24 hours.

Is this tie-dye soda ash calculator free?

Yes—scale soda ash buckets, Procion MX dye powder, urea, and squeeze bottles for birthday parties or studio batches instantaneously in your browser.