Guide

THE TOOLBOX / LIFE & SEWING CRAFTS

Fabric Yardage Calculator —
Sewing Panels, Quilt Backing & Binding.

Calculate exact fabric yardage and meters for garments, curtains, throw pillows, tote bags, and quilt backing/binding. Accounts for bolt width (36″ to 108″), seam allowances, directional prints, and pre-wash shrinkage.

Project Presets:
Recommended Fabric to Buy
Yardage (⅛ yd)
1 ¼ yd
Exact: 1.16 yd
Metric Length
1.14 m
42 inches
Est. Cost
$17.50
2 pcs across WOF
Cut size per panel (incl. 0.5" seam): 19" × 19" (grain-aligned).

SEWING & QUILTING YARDAGE GUIDE

How to buy the right amount of fabric without overpaying or running short.

1. Respect Selvages & Grainline

A 44" bolt of quilting cotton usually gives only 42"–43" of usable width after trimming the printed selvage edges. Keep directional prints and velvet nap grain-aligned so motifs all face upright.

2. Compare Vertical vs. Horizontal Quilt Backing Seams

For rectangular throw and queen quilts, switching from a vertical seam to a horizontal seam can sometimes save 1 to 2 full yards of backing fabric. The Quilt tab compares both automatically.

3. Round Up to Standard Cut Increments

Fabric stores cut in ⅛-yard (4.5") or ¼-yard (9") increments. Our output rounds up automatically to the nearest ⅛ yard so you have a clean shopping figure at the cutting counter.

Frequently Asked Questions

How do I calculate fabric yardage from width and length in inches?

Add twice your seam allowance to each piece’s width and length, determine how many pieces fit across the usable bolt width (width of fabric minus ~1" for selvages), multiply the number of rows by the cut length, add 5%–10% for shrinkage, and divide by 36 inches per yard.

How much extra fabric should I add for pre-washing shrinkage?

Natural fibers like 100% cotton, linen, and rayon commonly shrink 3%–8% in length on the first wash. Adding a 10% shrinkage and squaring-up buffer prevents running short after pre-washing.

How much backing fabric do I need for a Queen-size quilt?

A 90×100" Queen quilt with 4" overhang per side needs a 98×108" backing. Using standard 44" quilting cotton requires about 8¼ to 8¾ yards pieced with two seams, whereas 108" wideback fabric needs only 3 yards with zero seams.

What is the difference between 44/45", 54", and 60" fabric bolt widths?

44/45" is standard for quilting cottons and lightweight wovens; 54" is standard for upholstery, canvas, and drapery fabrics; 60" is standard for apparel knits, fleece, wool, and garment linens.

Does this fabric yardage calculator work offline?

Yes. All garment panel layouts, quilt backing seam comparisons, binding strip counts, and metric conversions run 100% locally in your browser.