1. Standard Dilution Equation
C₁ × V₁ = C₂ × V₂. Always add stock volume V₁ to (V₂ − V₁) of solvent—bringing the final volume up to V₂, not adding V₂ on top of V₁.
THE TOOLBOX / CHEMISTRY & LAB
Calculate exact stock and diluent volumes with automatic M/mM/µM/nM and L/mL/µL unit conversions, generate tube-by-tube serial dilution pipetting tables, and compute solute mass for molar solutions.
LABORATORY BENCH FORMULAS
C₁ × V₁ = C₂ × V₂. Always add stock volume V₁ to (V₂ − V₁) of solvent—bringing the final volume up to V₂, not adding V₂ on top of V₁.
For a 1:10 serial dilution into 1000 µL total per tube, pre-fill each tube with 900 µL buffer and transfer 100 µL sequentially from tube to tube, mixing thoroughly between steps.
M = Mass (g) ÷ (Molar Mass (g/mol) × Volume (L)). Rearranging gives Mass (g) = M × MW × L when preparing fresh stock buffers from powder.
When diluting concentrated acids or bases in the lab, always add concentrated stock slowly to water (never water to concentrated acid) to dissipate heat safely.
Working on more lab or math calculations? Try our Unit Converter, Ratio & Proportion Calculator, or 3D Volume Calculator.
C₁ is your starting stock concentration, V₁ is the volume of stock to pipette, C₂ is your target diluted concentration, and V₂ is the final total volume. Because total moles of solute stay constant during dilution, V₁ = (C₂ × V₂) ÷ C₁, and the solvent/diluent volume to add is V₂ − V₁.
Yes. Choose any combination of molar units (M, mM, µM, nM) and volume units (L, mL, µL). The calculator normalizes everything internally to base units before solving and converts the output back to your chosen display unit.
Open the 'Serial Dilution Table' tab, enter your starting stock concentration, step dilution factor (e.g., 2 or 10), final volume per tube, and number of tubes. It calculates the exact transfer volume, pre-filled diluent volume, cumulative ratio, and final concentration for every tube.
Use the 'Molarity & Mass' tab with formula Mass (g) = Target Molarity (mol/L) × Final Volume (L) × Molar Mass (g/mol). Click any common reagent preset (NaCl, Tris, Glucose, NaOH, KCl, EDTA) to fill its formula weight automatically.
Yes. All calculations run 100% locally in your browser with instant updates and one-click bench recipe copying.