Guide

THE TOOLBOX / METAL DETECTING & FIELD GUIDE

Metal Detector Target ID (VDI) Guide —
0–99 Conductivity Chart & Search Coil Depth Estimator.

Slide through the 0–99 VDI conductivity spectrum to identify iron, foil, gold rings, nickels, copper coins, and silver—and estimate coin vs. relic detection depth by coil size and soil mineralization.

Selected 0–99 VDI Reading

VDI 53 — Nickels, Pull Tabs & Mid Gold

40–56 Band

Likely Targets: US 5¢ Nickels (~50–53), beaver-tail pull tabs, men’s gold bands

Field Advice: Classic gold ring zone—dig crisp, repeatable signals.

Search Coil Depth & Soil Estimator

Coin-Sized Target Depth

~11.0"

Large Relic / Cache Depth

~21"

Target Separation

Balanced all-around

DETECTING FIELD NOTES

Frequently Asked Questions

Why do gold rings ring up in the same VDI range as aluminum pull tabs?

Gold alloys and aluminum pull tabs have overlapping electrical conductivity. Depending on karat weight and ring thickness, gold rings commonly register anywhere from 25 (thin 10k) to 65 (heavy 18k band), directly overlapping foil and pull tabs.

Does a larger metal detector coil always go deeper?

In mild, low-trash ground, a larger 15-inch coil sees deeper on medium-to-large targets and covers more ground per swing. In iron-littered parks, however, a smaller 6-inch sniper coil often finds more coins by separating good targets from adjacent nails.