Estimate quarter-mile elapsed time, trap speed, power-to-weight ratio, and crank horsepower from race weight and WHP—plus convert engine torque and RPM directly to horsepower.
Torque & RPM → Horsepower (TQ × RPM ÷ 5252)
Calculated Horsepower:452.8 HP
Quarter-Mile Strip Forecast9.4 lbs / WHP
1/4-Mile ET
12.31s
1/8-mi: ~7.89s
Trap Speed
110.7
MPH (178 km/h)
Est. Crank HP
488
~15% drivetrain loss
Assumes good tire traction and sea-level density altitude. High elevation or street tires with wheelspin typically add 0.3–0.7s to elapsed time while trap speed stays a reliable indicator of true horsepower.
PERFORMANCE PHYSICS
Frequently Asked Questions
How is quarter-mile ET and trap speed calculated from weight and horsepower?
Using the classic Roger Huntington / Hale drag-racing equations with wheel horsepower (WHP) and race weight including driver (W): ET = 5.825 × (W / WHP)^(1/3) and Trap Speed (MPH) = 234 × (WHP / W)^(1/3).
Why do horsepower and torque always cross at 5,252 RPM?
Because Horsepower = (Torque in lb-ft × RPM) ÷ 5,252 (derived from 33,000 ft-lbs/min ÷ 2π). At exactly 5,252 RPM, the ratio RPM/5252 equals 1, so HP and lb-ft of torque are mathematically identical.
Why is trap speed a better indicator of horsepower than elapsed time (ET)?
Elapsed time (ET) is heavily affected by launch traction, reaction technique, and tire spin in the first 60 feet, whereas 1/4-mile trap speed reflects total average power delivered across the full 1,320 feet.