Contact Lens Vertex Calculator — Corneal Vertex Compensation & Plus ↔ Minus Cylinder Transposer.
Convert eyeglass prescriptions (OD & OS Sphere, Cylinder, and Axis) to corneal-plane contact lens power at any back vertex distance (10–16 mm), calculate spherical equivalent, and transpose plus-cylinder ophthalmologist prescriptions instantly.
Sample Rx:
Eyeglass Prescription Input
Right Eye (OD)−6.50 / −1.25 × 180°
Left Eye (OS)−5.75 / −0.75 × 170°
Standard spectacle-to-cornea distance is 12 mm (US/ISO standard). Vertex adjustment becomes clinically significant at ±4.00 D and above.
Medical Note: Eyeglass and contact lens prescriptions are not interchangeable. Contact lenses also require a clinical fitting for Base Curve (BC), Diameter (DIA), and lens material by a licensed optometrist or ophthalmologist.
OPTICAL VERTEX CONVERSION CHART (12 MM)
How spectacle power shifts when moved 12 mm onto the cornea.
Glasses Power (Fs)
Minus Rx Contact (12mm)
Plus Rx Contact (12mm)
Shift Magnitude
±4.00 D
−3.82 D (−3.75)
+4.20 D (+4.25)
~0.20 D
±6.00 D
−5.60 D (−5.50)
+6.47 D (+6.50)
~0.43 D
±8.00 D
−7.30 D (−7.50)
+8.85 D (+9.00)
~0.75 D
±10.00 D
−8.93 D (−9.00)
+11.36 D (+11.50)
~1.20 D
1. Why Minus Gets Weaker & Plus Gets Stronger
Moving a diverging (minus) lens closer to the eye increases its effective focusing strength, so less minus power is needed on the cornea. Moving a converging (plus) lens closer reduces its effective power, so more plus power is needed.
2. Dual-Meridian Astigmatism Accuracy
A spherocylindrical lens has two distinct focal powers 90° apart. This calculator applies Fc = Fs / (1 − d·Fs) to both meridians separately so high-astigmatism prescriptions stay optically accurate.
3. Optometrist vs. Ophthalmologist Notation
Optometrists usually write prescriptions in minus-cylinder form, while ophthalmologists often write in plus-cylinder form. Both describe the exact same optical lens once transposed.
The optical vertex compensation formula is Fc = Fs ÷ (1 − d × Fs), where Fs is the eyeglass lens power in diopters, d is the back vertex distance in meters (typically 0.012 m for 12 mm), and Fc is the equivalent power at the corneal plane.
When does vertex distance matter for contact lenses?
Vertex conversion is generally applied whenever either principal meridian of an eyeglass prescription is ±4.00 diopters or stronger. For minus (nearsighted) prescriptions, contact lenses need less minus power than glasses; for plus (farsighted) prescriptions, contact lenses need more plus power.
How do you transpose a plus-cylinder prescription to minus-cylinder?
Follow three steps: (1) add the Sphere and Cylinder algebraically to get the new Sphere, (2) flip the Cylinder sign (+ to − or − to +), and (3) rotate the Axis by 90 degrees (add 90 if ≤ 90°, subtract 90 if > 90°).
How is vertex compensation calculated for astigmatism (toric lenses)?
Rather than adjusting only the sphere, the calculator converts both principal meridians (SPH and SPH + CYL) independently to the corneal plane, then subtracts them to find the exact vertex-compensated cylinder power.
What is Spherical Equivalent (SE) in a contact lens prescription?
Spherical Equivalent equals Sphere + (Cylinder ÷ 2). When astigmatism is small (often −0.50 D or less), clinicians may evaluate a spherical contact lens near the spherical equivalent instead of a toric lens.
Can I order contact lenses using only this calculator?
No. This tool is for optical education and reference. A valid contact lens prescription from an eye doctor is legally required and includes lens brand, Base Curve (BC), and Diameter (DIA) measured during an exam.