1. Why DTMF Uses Non-Harmonic Frequencies
Each of the 8 DTMF frequencies is carefully spaced so no frequency is a multiple of another. This prevents human speech or background harmonics from falsely triggering keypad tones on phone lines.
THE TOOLBOX / AUDIO & DSP
Upload any audio recording or listen via your microphone to decode telephone DTMF digits (0–9, *, #, A–D) locally in your browser—or synthesize custom touch-tone WAV sequences.
Upload a WAV, MP3, M4A, or OGG recording. Goertzel DSP runs 100% locally in your browser.
ITU-T Q.23 FREQUENCY MATRIX
| Low Group \ High Group | 1209 Hz | 1336 Hz | 1477 Hz | 1633 Hz |
|---|---|---|---|---|
| 697 Hz | 1 | 2 | 3 | A |
| 770 Hz | 4 | 5 | 6 | B |
| 852 Hz | 7 | 8 | 9 | C |
| 941 Hz | * | 0 | # | D |
Each of the 8 DTMF frequencies is carefully spaced so no frequency is a multiple of another. This prevents human speech or background harmonics from falsely triggering keypad tones on phone lines.
ITU-T recommendations specify at least 40 ms tone duration and 40 ms inter-digit silence. Using 100–120 ms tones with 60–70 ms gaps ensures clean detection across noisy VoIP and radio links.
Analyze sound levels in our Decibel Calculator, test musical pitch with the Vocal Range & Pitch Tester, or inspect note sequences in the MIDI Player & Piano-Roll Visualizer.
DTMF (Dual-Tone Multi-Frequency) is the standard touch-tone signaling system used on telephone keypads. A DTMF decoder analyzes an audio recording or live microphone feed to identify the simultaneous low-group (697–941 Hz) and high-group (1209–1633 Hz) sine waves and recover the dialed digits (0–9, *, #, A–D).
It runs the Goertzel digital signal processing algorithm across sliding 35 ms audio windows for all eight ITU-T Q.23 DTMF frequencies, checking harmonic dominance and twist ratio to accurately isolate phone keypresses without uploading your audio.
Any audio format supported by your browser’s Web Audio API—including WAV, MP3, M4A, OGG, and WebM recordings—plus real-time decoding directly from your microphone.
The fourth column (1633 Hz) produces the A, B, C, and D tones. Originally built for military Autovon priority dialing, they are still used today for amateur (ham) radio repeater control, VoIP diagnostics, and CTF audio challenges.
Yes. Switch to the Keypad & WAV Tone Generator tab, type any sequence of 0–9, *, #, or A–D, adjust tone duration and pause gap in milliseconds, and click "Download .WAV" to export a 16-bit 44.1 kHz mono audio file.
No. All audio decoding, microphone DSP, and WAV synthesis run 100% locally inside your browser.