Guide

CYCLING & FITNESS · ROAD, GRAVEL, MTB, TUBELESS & HOOKLESS PSI/BAR

Bicycle Tire Pressure Calculator,
front & rear PSI/BAR with hookless safety cap.

Calculate optimal front and rear bike tire pressure in PSI and BAR for road, gravel, MTB, tubeless, and hookless wheels based on total weight, tire width, and surface.

Rider, Bike & Tire Setup

Recommended Tire Pressure

Front Tire (28mm)110 PSI7.58 BAR43% weight load
Rear Tire (28mm)110 PSI7.58 BAR57% weight load
Total System Weight83.5 kg (184 lbs)
Front / Rear Diff0.0 PSI
Max Rim Limit110 PSI
Dialing it in: Always verify your tire sidewall and rim manufacturer maximum pressure limits. In wet weather or loose gravel, dropping 3–5 PSI increases contact patch grip without noticeably hurting rolling speed.

BALLPARK TIRE PRESSURE REFERENCE

Typical tubeless pressures by bike discipline (75 kg / 165 lb rider).

Bike TypeTypical Tire WidthTubeless Front / Rear (PSI)Tubeless Front / Rear (BAR)
Road (Race / All-Road)28mm – 30mm66 – 74 PSI4.5 – 5.1 BAR
Endurance Road32mm – 35mm52 – 62 PSI3.6 – 4.3 BAR
Gravel40mm – 45mm32 – 42 PSI2.2 – 2.9 BAR
XC / Trail MTB2.25" – 2.4" (57–61mm)20 – 26 PSI1.4 – 1.8 BAR

Safety Checks & Related Tools

ETRTO Hookless Rule

Always verify both your tire sidewall and rim manufacturer limits. Hookless rims are strictly capped at 72.5 PSI (5.0 BAR) under ETRTO standards.

Frequently Asked Questions

Why should my front bike tire have lower pressure than the rear?

On almost every bicycle, 54% to 60% of your combined weight sits over the rear wheel. Running the front tire 4%–10% lower than the rear gives both tires equal deflection, improving cornering grip and hand comfort.

What is the maximum pressure for hookless tubeless rims?

Under ETRTO safety standards, hookless road and gravel rims have a strict maximum pressure of 72.5 PSI (5.0 BAR). Exceeding this limit can blow the tire off the rim. If you need higher pressure for your weight, switch to a wider tire (30mm–32mm+).

Is lower tire pressure actually faster on real roads?

Yes, up to a point. Over-inflated tires bounce off micro-imperfections in asphalt, wasting forward energy (impedance loss). Modern 28mm–32mm road tires typically roll fastest between 60 and 80 PSI depending on system weight.

How much lower can I run tubeless tires compared to inner tubes?

Tubeless setups eliminate pinch flats ("snakebites") and reduce casing friction, allowing you to safely run roughly 8%–12% lower pressure than standard butyl inner tubes.

Should I lower tire pressure in the rain?

Yes. Dropping 3–5 PSI (0.2–0.35 BAR) in wet conditions enlarges the tire contact patch for noticeably better braking and cornering traction on slick pavement or roots.

Should I use labeled tire width or actual measured width?

Use the actual measured width on your rim if you know it. A 28mm tire mounted on a wide modern 25mm internal rim often measures 30mm–31mm, which calls for ~8–10 PSI less than a true 28mm tire.