Guide

THE TOOLBOX / ARCHERY & BALLISTICS

Arrow FOC Calculator —
Front of Center %, Kinetic Energy (ft·lbs) & Momentum.

Calculate your arrow's exact Front of Center (FOC %) from nock or tip, compute kinetic energy, momentum, and grains per pound (GPP), and visualize your balance point live.

Arrow Builds:
1. Arrow FOC Measurements
2. Kinetic Energy & Bow Specs
Arrow Front of Center (FOC) & BallisticsAll-Around Hunting (10–15%)
FOC %
13.1%
3.80" fwd of mid
Kinetic Energy
75.5
ft·lbs
Momentum
0.543
slug·ft/s
Grains per Pound (GPP)6.77 GPP (Safe)
Est. Static Spine / Game340 (or 300 with heavy insert)

Heavy / Dangerous Game (65+ ft-lbs): Ideal balance of broadhead flight stability, penetration, and flat hunting trajectory.

Arrow Balance Point vs. Midpoint
Midpoint (14.5")Balance (18.3") · 13.1% FOC

ARCHERY FOC & KINETIC ENERGY TARGETS

Recommended FOC % & Kinetic Energy by Discipline & Game Size.

Discipline / GameRecommended FOCMin. Kinetic EnergyTypical Arrow Weight
Indoor / 3D Target7% – 10%N/A320 – 400 gr
Whitetail / Mule Deer10% – 15%25 – 41 ft·lbs400 – 475 gr
Elk / Moose / Black Bear13% – 18%42 – 64 ft·lbs475 – 550 gr
Heavy / Dangerous Game18% – 25%65+ ft·lbs550 – 750+ gr

1. How to Find Balance Point Accurately

Install your exact hunting broadhead or field point, then balance the finished arrow across the edge of a thin ruler or table knife. Mark the spot with masking tape and measure from the nock throat to the mark.

2. Momentum vs. Kinetic Energy

Fast, light arrows can post impressive kinetic energy numbers, but heavier, higher-FOC arrows retain far more momentum downrange and resist wind drift and bone deflection.

Frequently Asked Questions

What is the formula for Arrow FOC (Front of Center)?

Using the standard ATA/Easton method: FOC % = ((Balance Point from Nock Groove − Total Arrow Length / 2) ÷ Total Arrow Length) × 100. For example, a 29-inch arrow balancing at 18.3 inches from the nock has ((18.3 − 14.5) / 29) × 100 = 13.1% FOC.

What is the ideal arrow FOC percentage for hunting vs. target shooting?

Target and 3D archers typically prefer 7%–10% FOC for flatter long-range trajectories. Bowhunters generally aim for 10%–15% FOC for all-around deer hunting, or 15%–20% high-FOC builds for elk, moose, and deeper bone penetration.

How do you calculate arrow kinetic energy (KE) and momentum?

Kinetic Energy (ft-lbs) = (Arrow Weight in grains × Speed² in fps) ÷ 450,240. Momentum (slug·ft/s) = (Arrow Weight in grains × Speed in fps) ÷ 225,400.

What is the minimum safe GPP (Grains per Pound) for a compound bow?

Most compound bow manufacturers specify a strict minimum of 5 grains of arrow weight per pound of draw weight (for example, at least 350 grains on a 70 lb bow). Shooting lighter arrows acts like a partial dry-fire and can damage limbs or void your warranty.

Where do you measure total arrow length for FOC?

Measure from the bottom of the nock groove (throat of the nock) to the front end of the shaft or base of the point/broadhead insert—and keep the broadhead or field point installed when finding the balance point.

How does adding front weight affect arrow spine?

Adding heavier points or brass inserts increases FOC but makes the arrow act dynamically weaker (more flexible). High-FOC builds (15%+) often require stepping down to a stiffer static spine (e.g., from 340 to 300).